|
Just throwing this out there in case someone has a set they want to send to a new good home. I’ve been looking for a few years and had one near miss where I actually found a set. So if you have a set and want to see them go to a good home please let me know.
1983 Bronco XLT being rebuilt/restored with a 5.8 HO & ZF5 and a pile of other improvements.....
Serpentine drive; saginaw saw; 3G swap; manual swap with a ZF5; hydro boost swap to name a few....
|
|
Administrator
|
Maybe our resident eBay guru can find one. David?
Gary, AKA "Gary fellow": Profile
Dad's: '81 F150 Ranger XLT 4x4: Down for restomod: Full-roller "stroked 351M" w/Trick Flow heads & intake, EEC-V SEFI/E4OD/3.50 gears w/Kevlar clutches
|
|
Administrator
|
By the way, I see the part numbers as E3TZ 17682-H & E3TZ 17682-J. Right?
Gary, AKA "Gary fellow": Profile
Dad's: '81 F150 Ranger XLT 4x4: Down for restomod: Full-roller "stroked 351M" w/Trick Flow heads & intake, EEC-V SEFI/E4OD/3.50 gears w/Kevlar clutches
|
|
Here is all I have to work from but I think you are correct.
1983 Bronco XLT being rebuilt/restored with a 5.8 HO & ZF5 and a pile of other improvements.....
Serpentine drive; saginaw saw; 3G swap; manual swap with a ZF5; hydro boost swap to name a few....
|
|
Administrator
|
Look here (Exterior/Exterior Mirrors), click on the Part #'s tab, and scroll down to Type 9.
Gary, AKA "Gary fellow": Profile
Dad's: '81 F150 Ranger XLT 4x4: Down for restomod: Full-roller "stroked 351M" w/Trick Flow heads & intake, EEC-V SEFI/E4OD/3.50 gears w/Kevlar clutches
|
|
In reply to this post by Alfie623
Wow, another "Holy Grail' of Bullnose parts....
1986 F-150 Flareside 4x4, 351, 4-v, ZF5 speed. AC, Cruise, Tilt, Slider, Digital clock, Radio, Lariat seat, Pwr doors/locks
|
|
Administrator
|
In reply to this post by Gary Lewis
Damn, I thought the mirrors on my 1977 were the same heads as Darth has, type 8.
Bill AKA "LOBO" Profile
"Getting old is inevitable, growing up is optional" Darth Vader 1986 F350 460 converted to MAF/SEFI, E4OD 12X3 1/2 rear brakes, traction loc 3:55 gear, 160 amp 3G alternator Wife's 2011 Flex Limited Daily Driver 2009 Flex Limited with factory tow package Project car 1986 Chrysler LeBaron convertible 2.2L Turbo II, modified A413 |
|
Administrator
|
Heads are the same:
![]() ![]()
Gary, AKA "Gary fellow": Profile
Dad's: '81 F150 Ranger XLT 4x4: Down for restomod: Full-roller "stroked 351M" w/Trick Flow heads & intake, EEC-V SEFI/E4OD/3.50 gears w/Kevlar clutches
|
|
Administrator
|
I know, I looked the parts list.
Bill AKA "LOBO" Profile
"Getting old is inevitable, growing up is optional" Darth Vader 1986 F350 460 converted to MAF/SEFI, E4OD 12X3 1/2 rear brakes, traction loc 3:55 gear, 160 amp 3G alternator Wife's 2011 Flex Limited Daily Driver 2009 Flex Limited with factory tow package Project car 1986 Chrysler LeBaron convertible 2.2L Turbo II, modified A413 |
|
Administrator
|
In reply to this post by Gary Lewis
In my many years long quest to find NOS and rare used pieces for our trucks, I have run across 1 set.
|
|
Administrator
|
Well, if you do again you know who wants one.
Gary, AKA "Gary fellow": Profile
Dad's: '81 F150 Ranger XLT 4x4: Down for restomod: Full-roller "stroked 351M" w/Trick Flow heads & intake, EEC-V SEFI/E4OD/3.50 gears w/Kevlar clutches
|
|
Wow - Almost 33 years at this, and I never knew that there was such a thing as power type 9s!
Can I retire now??
Ford Parts Monkey since 1985
1981 F100 Flareside - Black, 302-4V Roller/AOD 1986 F150 Flareside - Medium Fire Red 302/AOD 1989 F150 Standard Cab 4x4 - Dk Shadow Blue 302/AOD 1993 F350 4x4 Crew Cab - 7.3 IDI/ZF-5 I think it's a sickness... |
|
Administrator
|
In reply to this post by 1986F150Six
Back in 2014, Gary recorded a "survivor" Bronco which had the power mirrors along with many other options: https://www.ford-trucks.com/g/album/945775 |
|
Administrator
|
I forgot about that, David. Maybe I should put those pics up here?
Gary, AKA "Gary fellow": Profile
Dad's: '81 F150 Ranger XLT 4x4: Down for restomod: Full-roller "stroked 351M" w/Trick Flow heads & intake, EEC-V SEFI/E4OD/3.50 gears w/Kevlar clutches
|
|
Perhaps create a Rare Parts page for the site?
1986 Ford F250, Dana 60, Cummins 12V, ZF5
1985 Ford Bronco: Sold |
|
Administrator
|
In reply to this post by Gary Lewis
Yes, I think so, Gary. I had to search a while for your original post. |
|
Administrator
|
On the rare parts page, what all should be there?
As for the Bronco, I'll bring it over. And, I'm sure there are lots of other things that should come over, so as any of you see things that should be here, please let me know.
Gary, AKA "Gary fellow": Profile
Dad's: '81 F150 Ranger XLT 4x4: Down for restomod: Full-roller "stroked 351M" w/Trick Flow heads & intake, EEC-V SEFI/E4OD/3.50 gears w/Kevlar clutches
|
|
Power Mirrors
Fog lights Aluminum Wheels GT Bar Under hood tool box I can’t thibk of anything else.
1983 Bronco XLT being rebuilt/restored with a 5.8 HO & ZF5 and a pile of other improvements.....
Serpentine drive; saginaw saw; 3G swap; manual swap with a ZF5; hydro boost swap to name a few....
|
|
Administrator
|
In reply to this post by Gary Lewis
https://www.ford-trucks.com/g/album/3129776 |
|
Administrator
|
That one's already on here: About Me/Contact Me/Trucks I Have Known/1983 Bronco Survivor. But, it is in a really strange, awkward place so I need to create another place.
Any suggestions on how to categorize things like that?
Gary, AKA "Gary fellow": Profile
Dad's: '81 F150 Ranger XLT 4x4: Down for restomod: Full-roller "stroked 351M" w/Trick Flow heads & intake, EEC-V SEFI/E4OD/3.50 gears w/Kevlar clutches
|
| Edit this page |
