Search Forum
Introduction
Locked
Introduction
 
|
1978 E150 4.9L T18 (9" posi-trac differential) 2.47 gearset milage
1983 F100 4.9L AOD (8.8" posi-trac differential 3.08 gearset 1985 F250 4.9L C6 4X4 (10.25 sterling open diff. 3.55 gearset 
1986 F250 5.8 C6 4X4 4.10 gearset parts truck frame rotted |
Re: Introduction
Administrator
|
Glad you've joined the forum!
 Are you here because of some plan or project with one of your trucks? That's quite the bumper you've got going there on the van.
Jim,
Lil'Red is a '87 F250 HD, 4.10's, 1356 4x4, Zf-5, 3G, PMGR, Saginaw PS, desmogged with a Holley 80508 and Performer intake. Too much other stuff to mention. |
Re: Introduction
Administrator
|
Mark - welcome! Glad you joined.
 And I see that you worked out how and where to post your intro. I see that on the message you sent me you claim to be old, but that falls on deaf ears - I'll be 75 in a couple of months, and one of the gurus on here will be 76 shortly.  Seriously though, we don't mean to have things complex. Or techie. But sometimes that happens, so if you have questions or concerns just ask. You have an interesting mix of trucks. I hope you'll explain your plans for them and maybe start a thread on each of them in the main section. We'll follow along and offer suggestions and support. And where's home? I ask because we have a map (Bullnose Forum and then Member's Map in the menu) and we can add you with a city/state or zip.
Gary, AKA "Gary fellow": Profile
Dad's: '81 F150 Ranger XLT 4x4: Down for restomod: Full-roller "stroked 351M" w/Trick Flow heads & intake, EEC-V SEFI/E4OD/3.50 gears w/Kevlar clutches
|
Re: Introduction
|