Bullnose Enthusiasts Forum

Clutch master cylinder bushing

Classic

List

Threaded

5 messages Options

Frogger2662

Clutch master cylinder bushing

Just some useful info.
Here is the Dorman part#
for the assortment of bushings that contain the bushing for the clutch master cylinder rod.
Dorman 14041
There is another number out
there that does not have the bushing I was looking for.

1984 F150 Flareside
1992 5.0 with edelbrock 4 barrel
Comp XE264HR cam
GT40 heads
3.70 rear gear with T5 trans
Dual exhaust.

Gary Lewis

Re: Clutch master cylinder bushing

Administrator

Good to know. Thanks!

Gary, AKA "Gary fellow": Profile

Dad's: '81 F150 Ranger XLT 4x4: Down for restomod: Full-roller "stroked 351M" w/Trick Flow heads & intake, EEC-V SEFI/E4OD/3.50 gears w/Kevlar clutches
Blue: 2015 F150 Platinum 4x4 SuperCrew wearing Blue Jeans & sporting a 3.5L EB & Max Tow
Big Blue: 1985 F250HD 4x4: 460/ZF5/3.55's, D60 w/Ox locker & 10.25 Sterling/Trutrac, Blue Top & Borgeson, & EEC-V MAF/SEFI

ArdWrknTrk

Re: Clutch master cylinder bushing

Administrator

In reply to this post by Frogger2662

This should be documented.
I've posted this number too many times before.
The packaging has changed in the last 16 years, but the product remains available.

Jim,
Lil'Red is a '87 F250 HD, 4.10's, 1356 4x4, Zf-5, 3G, PMGR, Saginaw PS, desmogged with a Holley 80508 and Performer intake.
Too much other stuff to mention.

Frogger2662

Re: Clutch master cylinder bushing

In reply to this post by Frogger2662

I think the biggest problem is that when members search for this bushing there is confusion on what to call it. I wish we could find the bushing by them selves with out having to buy an assortment.

1984 F150 Flareside
1992 5.0 with edelbrock 4 barrel
Comp XE264HR cam
GT40 heads
3.70 rear gear with T5 trans
Dual exhaust.

ArdWrknTrk

Re: Clutch master cylinder bushing

Administrator

This is why I'm always careful to mention "the four fingered one"

You can get JUST this bushing, but it isn't available in the HELP section of almost every auto parts store in the nation.
Hence, the conundrum!.

Jim,
Lil'Red is a '87 F250 HD, 4.10's, 1356 4x4, Zf-5, 3G, PMGR, Saginaw PS, desmogged with a Holley 80508 and Performer intake.
Too much other stuff to mention.