Administrator
|
This is a call for pictures for the June Truck Of The Month contest. Post them here and at about the 15th of May I'll set up the poll.
But a question for y'all - should this be pinned, and if so in the main section or in the Monthly Truck Photo Contest folder?
Gary, AKA "Gary fellow": Profile
Dad's: '81 F150 Ranger XLT 4x4: Down for restomod: Full-roller "stroked 351M" w/Trick Flow heads & intake, EEC-V SEFI/E4OD/3.50 gears w/Kevlar clutches
|
Here's a pic of my bullnose and daily
Brian,
1986 f250 xlt lariat 4x4/ 460 4 speed 2016 super duty lifted 1949 Ford custom sedan, orig flathead eight |
In reply to this post by Gary Lewis
I think that would be a good idea Gary. Three topics for every month: nominations, poll, winner... Otherwise I think this thread could fall off the first page quickly and the whole thing could die out again. Also, what about carrying over previous nominations? So a picture stays in the field until it wins for a year or the calendar year?
Rob
Eddy Myrtle '84 F150 300-6, Offenhauser C series intake, Edelbrock 1404(500cfm manual choke), EFI exhaust manifold, HEI dizzy, custom Painless harness, NP 435, NP 208, D44, 8.8"/3.08, 1.5" leveling coils, 265/75/16 tires. Toyopet (Daily driver) '86 Toyota Pickup |
Administrator
|
Rob - I think the carry-over is a good idea. But where should I pin it? In the main section or the TOM folder?
All - Do you agree with the carry-over? What about pinning?
Gary, AKA "Gary fellow": Profile
Dad's: '81 F150 Ranger XLT 4x4: Down for restomod: Full-roller "stroked 351M" w/Trick Flow heads & intake, EEC-V SEFI/E4OD/3.50 gears w/Kevlar clutches
|
In reply to this post by Gary Lewis
Lets toss this one in here and see where it goes
Steve
86 Bronco, XLT, 5.0 EFI, EEC IV, AOD, IFS, limited slip front and rear, 3.08 gears, Tilt steering, factory AC |
In reply to this post by Gary Lewis
Also, yes. The runners up from the last contest are some great looking pickup's and should be carried over.
Steve
86 Bronco, XLT, 5.0 EFI, EEC IV, AOD, IFS, limited slip front and rear, 3.08 gears, Tilt steering, factory AC |
In reply to this post by Gary Lewis
I am for the carry over till the truck is a winner. As for pinning, any way to move the non-winners over to the new TOM post? I know it puts more work on you or Gary's helpers if they have the rights. Dave ----
Dave G.
81 F100 flare side 300 six / AA OD / NP435 / 2.75 gear http://cars.grantskingdom1.com/index.php/1980-Ford-F100?page=1 81 F100 style side 300 six/SROD parts truck -RIP http://cars.grantskingdom1.com/index.php/1981-Ford-F100 |
In reply to this post by old55pete
Excellent! I was just going to say that we need some Bronco's in the mix!
1994 F150 4x2 Flareside. 5.0 w/MAF, 4R70W, stock.
1984 F150 4X2 Flareside. Mild 302 w/ 5spd. Sold. 1980 F150 4X4 Flareside. 300i6 w/ 5spd. Sold in 2021. 1980 F100 4X2 Flareside. 351w/2bbl w/NP435. Sold in 1995 |
Rembrant, I pretty sure there are a lot better looking ones on this site then mine. But I will break the ice on them...………..lol
Steve
86 Bronco, XLT, 5.0 EFI, EEC IV, AOD, IFS, limited slip front and rear, 3.08 gears, Tilt steering, factory AC |
In reply to this post by Gary Lewis
Sorry Gary, my post wasn't clear. I meant pin them in the TOM folder, but I suppose the main section would work just as well if you wanted to keep the TOM for the winners only. Then you could keep the TOM folder as is and just add the monthly nominations and poll to the main section pinned area with the Lounge etc.
Rob
Eddy Myrtle '84 F150 300-6, Offenhauser C series intake, Edelbrock 1404(500cfm manual choke), EFI exhaust manifold, HEI dizzy, custom Painless harness, NP 435, NP 208, D44, 8.8"/3.08, 1.5" leveling coils, 265/75/16 tires. Toyopet (Daily driver) '86 Toyota Pickup |
No worries Steve. This forum is all about saving these trucks and keeping them on the road. They can't all be restored garage queens! Lord knows my daily isn't perfect, but she's driven every day!
It reminds me of a tractor that used to show up at the Oregon SteamUp every year. It was a late 40's John Deere LA - rough old dog with hardly a speck of paint left on it. It ALWAYS came in running under it's own power with a big sign that said "I STILL WORK FOR A LIVING".
Ford Parts Monkey since 1985
1981 F100 Flareside - Black, 302-4V Roller/AOD 1986 F150 Flareside - Medium Fire Red 302/AOD 1989 F150 Standard Cab 4x4 - Dk Shadow Blue 302/AOD 1993 F350 4x4 Crew Cab - 7.3 IDI/ZF-5 I think it's a sickness... |
It don't look to bad for mostly original paint from the front door back on the drivers side and from the back of the pass door back. The front tin was replaced it 93 and re painted. The newer paint will buff out and look as good as the original except on the pass door. Im not sure what the deal is with that as it is two shades of red and when the door was put on, they put bondo over a rust spot and re painted it again. All of this work was done because of accidents my ex-wife had in it.
Steve
86 Bronco, XLT, 5.0 EFI, EEC IV, AOD, IFS, limited slip front and rear, 3.08 gears, Tilt steering, factory AC |
In reply to this post by Gary Lewis
I think this needs pinning to the main page. Found this thread 3 pages back......
Alan
1984 F150 XLT short bed 4x4 351w 4speed manual
1980 F100 long bed 2wd 300-6 3speed manual project truck 🇬🇧UK based truck enthusiast🇬🇧 |
Administrator
|
Good point, I'd forgotten it myself. Done. Thanks.
Gary, AKA "Gary fellow": Profile
Dad's: '81 F150 Ranger XLT 4x4: Down for restomod: Full-roller "stroked 351M" w/Trick Flow heads & intake, EEC-V SEFI/E4OD/3.50 gears w/Kevlar clutches
|
Here's my "Parts Truck". Named that because it was a package deal with an '86 flare side that was a bare rolling chassis. It was intended to be a donor, but I didn't have the heart to use it for that! It's been my daily for well over a year now, and is bulletproof! 1986, 302/AOD, currently has about 188k original miles on it.
Ford Parts Monkey since 1985
1981 F100 Flareside - Black, 302-4V Roller/AOD 1986 F150 Flareside - Medium Fire Red 302/AOD 1989 F150 Standard Cab 4x4 - Dk Shadow Blue 302/AOD 1993 F350 4x4 Crew Cab - 7.3 IDI/ZF-5 I think it's a sickness... |
Man that's a fine lookin' parts truck.
1994 F150 4x2 Flareside. 5.0 w/MAF, 4R70W, stock.
1984 F150 4X2 Flareside. Mild 302 w/ 5spd. Sold. 1980 F150 4X4 Flareside. 300i6 w/ 5spd. Sold in 2021. 1980 F100 4X2 Flareside. 351w/2bbl w/NP435. Sold in 1995 |
Administrator
|
In reply to this post by myrl883
Yes, that's a good looking truck!
And, you've reminded me that I'm late to get the poll up. Thanks!
Gary, AKA "Gary fellow": Profile
Dad's: '81 F150 Ranger XLT 4x4: Down for restomod: Full-roller "stroked 351M" w/Trick Flow heads & intake, EEC-V SEFI/E4OD/3.50 gears w/Kevlar clutches
|
In reply to this post by myrl883
That is one good looking pickup for being a " parts truck". I am glad you dident part it out.
Steve
86 Bronco, XLT, 5.0 EFI, EEC IV, AOD, IFS, limited slip front and rear, 3.08 gears, Tilt steering, factory AC |
Edit this page |