Administrator
|
Could I get a few of you to try something for me? On the far right of the menu above we have a pick for New Bullnose Test Forum. Could you click on that and see if it shows you as logged in? You'll be able to tell because if you are it'll show your screen name where I've circled Log In on the screenshot below.
If you aren't logged in would you try to log in? You should be able to get in with the same email and password as on this version of the forum. THANKS IN ADVANCE!
Gary, AKA "Gary fellow": Profile
Dad's: '81 F150 Ranger XLT 4x4: Down for restomod: Full-roller "stroked 351M" w/Trick Flow heads & intake, EEC-V SEFI/E4OD/3.50 gears w/Kevlar clutches
|
Administrator
|
Gary, I got an error your login or password are wrong.
Bill AKA "LOBO" Profile
"Getting old is inevitable, growing up is optional" Darth Vader 1986 F350 460 converted to MAF/SEFI, E4OD 12X3 1/2 rear brakes, traction loc 3:55 gear, 160 amp 3G alternator Wife's 2011 Flex Limited Daily Driver 2009 Flex Limited with factory tow package Project car 1986 Chrysler LeBaron convertible 2.2L Turbo II, modified A413 |
Administrator
|
In reply to this post by Gary Lewis
Did not see my name in the log in. Seemed to let me login, but again, did not see my name. Also went to the people on line, and noted noone present, including self.
John
"Blackie" - 1986 F150 4x4 - Mildly warmed over 351W HO - Original owner |
Administrator
|
Ok, guys. Thanks! What you are seeing is consistent with what I've been seeing. I cannot log in to the one embedded on the website. Or, if I do log in and don't get an error message it doesn't tell me that I am logged in.
Next question: try logging in here: http://bullnose-enthusiasts-test-forum.7.gabbleforum.org/ In fact, you probably will be logged in when you click on the link. But, please let me know what you find. As to the difference, the one in the menu is embedded on the website. The one in the link above is just on the AWS servers. PLEASE NOTE: THAT IS AN OLD BACKUP SO ANY OF YOU THAT JOINED IN THE LAST MONTH PROBABLY AREN'T A MEMBER ON IT. FURTHER, PLEASE DON'T ASK TO JOIN! THIS IS A TEST-ONLY FORUM AND EVERYTHING ON IT WILL GET BLOWN AWAY AT SOME POINT IN TIME.
Gary, AKA "Gary fellow": Profile
Dad's: '81 F150 Ranger XLT 4x4: Down for restomod: Full-roller "stroked 351M" w/Trick Flow heads & intake, EEC-V SEFI/E4OD/3.50 gears w/Kevlar clutches
|
In reply to this post by Machspeed
It let me log in, but it dident show that I was logged in.
Steve
86 Bronco, XLT, 5.0 EFI, EEC IV, AOD, IFS, limited slip front and rear, 3.08 gears, Tilt steering, factory AC |
Administrator
|
Steve - I assume you mean that you got no error message so it seems you got logged in, but that it doesn't show you logged in. Right?
Please try this way into it: http://bullnose-enthusiasts-test-forum.7.gabbleforum.org/
Gary, AKA "Gary fellow": Profile
Dad's: '81 F150 Ranger XLT 4x4: Down for restomod: Full-roller "stroked 351M" w/Trick Flow heads & intake, EEC-V SEFI/E4OD/3.50 gears w/Kevlar clutches
|
Logging in worked for me Gary.
1994 F150 4x2 Flareside. 5.0 w/MAF, 4R70W, stock.
1984 F150 4X2 Flareside. Mild 302 w/ 5spd. Sold. 1980 F150 4X4 Flareside. 300i6 w/ 5spd. Sold in 2021. 1980 F100 4X2 Flareside. 351w/2bbl w/NP435. Sold in 1995 |
In reply to this post by Gary Lewis
Ok, I followed the link and logged in. I went to a post like I did the last time, one that I interacted in and this time the green dot was there showing that I was logged in.
Steve
86 Bronco, XLT, 5.0 EFI, EEC IV, AOD, IFS, limited slip front and rear, 3.08 gears, Tilt steering, factory AC |
Administrator
|
In reply to this post by Rembrant
Cory - To which version did you log in? The one in the menu above or the link? And, how do you know you were logged in - you see "Rembrant" in place of "Log in"?
Gary, AKA "Gary fellow": Profile
Dad's: '81 F150 Ranger XLT 4x4: Down for restomod: Full-roller "stroked 351M" w/Trick Flow heads & intake, EEC-V SEFI/E4OD/3.50 gears w/Kevlar clutches
|
Administrator
|
In reply to this post by old55pete
Perfect! Thanks.
Gary, AKA "Gary fellow": Profile
Dad's: '81 F150 Ranger XLT 4x4: Down for restomod: Full-roller "stroked 351M" w/Trick Flow heads & intake, EEC-V SEFI/E4OD/3.50 gears w/Kevlar clutches
|
In reply to this post by Gary Lewis
I followed the link you just posted. The screen said "Login" in the upper RH corner. I logged in, and then the "Login" link disappeared, so I assumed that it worked.
1994 F150 4x2 Flareside. 5.0 w/MAF, 4R70W, stock.
1984 F150 4X2 Flareside. Mild 302 w/ 5spd. Sold. 1980 F150 4X4 Flareside. 300i6 w/ 5spd. Sold in 2021. 1980 F100 4X2 Flareside. 351w/2bbl w/NP435. Sold in 1995 |
Administrator
|
Perfect. Thanks for the clarification.
Gary, AKA "Gary fellow": Profile
Dad's: '81 F150 Ranger XLT 4x4: Down for restomod: Full-roller "stroked 351M" w/Trick Flow heads & intake, EEC-V SEFI/E4OD/3.50 gears w/Kevlar clutches
|
Administrator
|
Gary, I just tried it again using the link you posted. I was able to log in and it showed me as logged in.
Bill AKA "LOBO" Profile
"Getting old is inevitable, growing up is optional" Darth Vader 1986 F350 460 converted to MAF/SEFI, E4OD 12X3 1/2 rear brakes, traction loc 3:55 gear, 160 amp 3G alternator Wife's 2011 Flex Limited Daily Driver 2009 Flex Limited with factory tow package Project car 1986 Chrysler LeBaron convertible 2.2L Turbo II, modified A413 |
Administrator
|
Perfect. That's exactly what I thought would happen. Thanks, Bill.
Gary, AKA "Gary fellow": Profile
Dad's: '81 F150 Ranger XLT 4x4: Down for restomod: Full-roller "stroked 351M" w/Trick Flow heads & intake, EEC-V SEFI/E4OD/3.50 gears w/Kevlar clutches
|
Same results for me, pick up top didn't show me as logged in (no error messages), but the link you posted showed me as logged in.
|
Administrator
|
Thanks, Shaun.
Gary, AKA "Gary fellow": Profile
Dad's: '81 F150 Ranger XLT 4x4: Down for restomod: Full-roller "stroked 351M" w/Trick Flow heads & intake, EEC-V SEFI/E4OD/3.50 gears w/Kevlar clutches
|
Edit this page |