86 f350 4 speed, manual 4x4, 6.9 diesel, crew cab: Pemberton BC

[Ratboyslim]

Hey there.

Just brought home the new to me beauty today.

Bought her from and old logger here in town.  Saw it in his boneyard over the summer and finally scrounged up enough to buy it.
Paint is peeling.
She has a wiring issue, but there is no rust. Well, maybe a tiny bit on the front bottom of the passenger's bottom wheelwell/quarter panel: about the size of a Tooney.
She comes with a Rebco logger's box, decent rear tires, a hidden hitch and no batteries.

I paid 500$ Canadian.  She has 280k on the engine, but hasn't seen a paved road in 20 years and probably hasn't gone over 50-60 k since then. She was made in Canada.

I am going to voltage drop test tomorrow. Just using a jump link to another truck and 1 battery on the passenger side.

Rear running lights come on. Had the front head light on for about a minute today and the driver's side front running light works. Radio works, but no dash lights. Interior light works as do the diesel checks such as water in fuel and temp.

She has a ghost switch under the front bumper to close off any power to the interior so that she wouldn't get stolen when she was left on the block.

Gonna go through all the grounds and start testing from the battery back to the steering column.

Any ideas are welcome.

Will post some pics tomorrow.

[grumpin]

Welcome!

Had to look up Tooney!

[Gary Lewis]

Yes, welcome!  Looking forward to seeing pics as well as results of your tests.

But before getting to the tests, a couple of things.  First, how 'bout creating a signature?  You could put your first name in it as well as info about your truck.  In fact, the info in the title of this thread is a good start, and the fact that it has your location is even better.

And, speaking of your location, we have a member's map (Bullnose Forum/Member's Map in the menu) and I'd be happy to put you on it - with your permission.

On the testing, the voltage drop test is a good one.  But another thing you might do if you have a current draw you can't find is to do the voltage drop test in conjunction with pulling fuses.  When you find the fuse that is fueling the current draw you'll see the voltage drop reduce significantly.

Good luck!

[Rembrant]

Oh wow, Pemberton...very nice area up there. We passed through there on a cross country motorcycle trip back in 2011. Welcome aboard the forum (I'm out in the Maritimes).

[Ratboyslim]

Hi Gary,

Tried to create a profile. Not sure if it worked that well.

Will go back and edit with location and first name.

Everything looks pretty good in the wire department.  I think I may have traced it back to the steering column.  Gonna' pull steering wheel tomorrow.  It needs a double puller and in my excitement to get going on the project I snapped a bolt in one of the puller holes. Now have to drill out, tap and start again.


Cant seem to download images.  probably a size thing.  I will try to make them 1 mb.

Pete.

[Ratboyslim]

hey rembrandt.

thanks for being a part of this forum.  just found it when i was looking for parts and specs.  someone suggested it for glow plug info.

Never been to the Maritimes, although my family still has a farm  in New Brunswick.  Would love to get there one day.

pete

[ArdWrknTrk]

Welcome to the forum Ratboy.  

BC logging truck..... probably hasn't had an easy life.

Coupla ideas.

Trace the switch back, and see where the harness was hacked.
Probably disconnect it and make a quality splice in the harness.

Headlight(s) shut off.
Thermal breaker in the headlight switch is telling you there's a short on the one light that won't illuminate.
You can find a Electrical & Vacuum Testing Manual (EVTM) under 'Resources'. -1985 is fine-
The circuits are laid out individually, and each category has tests spelled out for you.
Every ground, splice and connector is shown.
Be sure to use the diesel pages, as their harness is different.

ETA: have a look at the plug that connects to the headlight switch.
The brown wire is known to melt, knocking out the dash lights that are controlled by the dimmer rehostat at the rear of the switch.
You can buy this plug with pigtails separately, as a replacement.
It's not too uncommon a repair.

[ArdWrknTrk]

Pete, In order to resize photo files all you have to do is check 'large size' when you go to insert an image.
The forum software will then do it for you.

[Gary Lewis]

Pete - If by "profile" you mean your signature then you are close and you know how to do it.  But if you mean a link in your sig to a post where you tell more about yourself and your truck that's a different story, and if that's the case then you need to follow the suggestion here.

Bummer on the snapped bolt!  

[Ray Cecil]

Welcome to the forum!!

[swampedout]

Good find! Sounds like a good price too. I guess keeping it off road has helped keep the salt away.
The electrical stuff on these trucks is pretty straight forward. I have a lot of diy wiring I need to sort out on my truck but everything has been easy to trace so far.
Nice username btw