|
Hello all. I was under a different name when i had my 84 F250 XL. you guys helped he a ton. Thanks
I just picked up an 83 flateside 4x4 short bed, 351 with added 4bbl intake. I ordered a Holley 4160. Reading the instructions, it says that they dont work well with automatic overdrive transmissions. I am not sure if I have AOD or not. I am not in front of the truck right now. Any direction would be appreciated. Thanks. |
|
Administrator
|
If you had a membership under a different name does that mean you've read the guidelines? If not, please go the New Members Start Here folder and read them. We ask that you know what the guidelines are as we will hold you to them.
As for the transmission, if the truck has a 351W it shouldn't have the AOD as they didn't put it behind that engine in a truck. So if it is an auto it should be the C6.
Gary, AKA "Gary fellow": Profile
Dad's: '81 F150 Ranger XLT 4x4: Down for restomod: Full-roller "stroked 351M" w/Trick Flow heads & intake, EEC-V SEFI/E4OD/3.50 gears w/Kevlar clutches
|
|
Administrator
|
In reply to this post by T1Dboston
Gary, this IS the NMSH...
Another member of the FOG! Wow, I'm beginning to feel like a black sheep! 🐑 I just made a post about the Holley 80457-S in another thread, saying that I didn't know how well the kickdown worked with OD, and Matt replied that he used a kit on his Bronco. I will tag him here, but this section is mostly for introductions, and specific questions are going to get more attention in the main forum.
Jim,
Lil'Red is a '87 F250 HD, 4.10's, 1356 4x4, Zf-5, 3G, PMGR, Saginaw PS, desmogged with a Holley 80508 and Performer intake. Too much other stuff to mention. |
|
Administrator
|
Ok, that's what I get for not slowing down to
Gary, AKA "Gary fellow": Profile
Dad's: '81 F150 Ranger XLT 4x4: Down for restomod: Full-roller "stroked 351M" w/Trick Flow heads & intake, EEC-V SEFI/E4OD/3.50 gears w/Kevlar clutches
|
|
In reply to this post by T1Dboston
welcome.
the combination that you have should have a c6 as the aod was still considered a light duty auto and the c6 is well proven as a heavy-duty unit so, it was used for the 351w as a rule. which 4160? this line of carbs should have the pin and linkage for the c6 kickdown rod. unless the truck has had some modification, the gear selector indicator in the dash cluster should show p r n d 2 1. an aod will not show the number 2. p r n od d l |
|
In reply to this post by ArdWrknTrk
Sorry Jim
I failed at navigating to the new members section. Joe |
|
Administrator
|
I don't know
Did Gary move your post??? ![]() Because this definitely is the new members section, and if you clicked the highlighted text it brought you right here. Are you in Boston, Joe? Not so many members in New England. Perhaps all these trucks have been eaten by the salted roads?
Jim,
Lil'Red is a '87 F250 HD, 4.10's, 1356 4x4, Zf-5, 3G, PMGR, Saginaw PS, desmogged with a Holley 80508 and Performer intake. Too much other stuff to mention. |
|
Administrator
|
Nope, I didn't move the post.
But I am interested in the location as we can put him on the map. Need a city/state or zip.
Gary, AKA "Gary fellow": Profile
Dad's: '81 F150 Ranger XLT 4x4: Down for restomod: Full-roller "stroked 351M" w/Trick Flow heads & intake, EEC-V SEFI/E4OD/3.50 gears w/Kevlar clutches
|
|
Administrator
|
If Joe likes, perhaps we can put him back together with his old username?
But obviously there's no need for apologies! Joe, we're very glad you're back (and our latest member of the Flareside Owners Group!).
Jim,
Lil'Red is a '87 F250 HD, 4.10's, 1356 4x4, Zf-5, 3G, PMGR, Saginaw PS, desmogged with a Holley 80508 and Performer intake. Too much other stuff to mention. |
|
In reply to this post by mat in tn
I ordered a Holly Street Warrior 4160 plus I ordered the kickdown kit.
I did check and no OD on the dash cluster. Bonus, it has the factory tach!
|
|
In reply to this post by ArdWrknTrk
Jim, I thought that when I clicked on New Members it brought me to the rules/guidelines. Then again, i accepted those terms when signing up.
I will master this. Yes, I am in Boston, but the truck was from Nevada. She has really good bones. Solid floors. I have a tech question, but before posting I need to take good pictures and will make sure I post correctly! Thanks. |
|
In reply to this post by ArdWrknTrk
I wouldn't mind finding my original identity.
You guys helped me bring an F250 back to life 1 issue at a time.
|
|
Administrator
|
Do you know what email address you used? Or any clue about the earlier handle/name?
Gary, AKA "Gary fellow": Profile
Dad's: '81 F150 Ranger XLT 4x4: Down for restomod: Full-roller "stroked 351M" w/Trick Flow heads & intake, EEC-V SEFI/E4OD/3.50 gears w/Kevlar clutches
|
|
Found him
https://forum.garysgaragemahal.com/1984-F250-HD-one-owner-scored-New-Guy-tp57978.html
Vivek
- BB 2WD - 1984 F350 RWD 460/C6 - 1978 Bronco with a 460 from an 86 Bullnose/C6 |
|
Administrator
|
Well done!
Gary, AKA "Gary fellow": Profile
Dad's: '81 F150 Ranger XLT 4x4: Down for restomod: Full-roller "stroked 351M" w/Trick Flow heads & intake, EEC-V SEFI/E4OD/3.50 gears w/Kevlar clutches
|
|
Thanks. That pic was the clue. Tossed it into google image search and google did the job.
Vivek
- BB 2WD - 1984 F350 RWD 460/C6 - 1978 Bronco with a 460 from an 86 Bullnose/C6 |
|
In reply to this post by T1Dboston
Nice truck! The word "Flareside" always catches my eye;).
1994 F150 4x2 Flareside. 5.0 w/MAF, 4R70W, stock.
1984 F150 4X2 Flareside. Mild 302 w/ 5spd. Sold. 1980 F150 4X4 Flareside. 300i6 w/ 5spd. Sold in 2021. 1980 F100 4X2 Flareside. 351w/2bbl w/NP435. Sold in 1995 |
|
In reply to this post by Gary Lewis
I found it.
Starliner1955 Madcrlies@gmail.com I will try logging in. Thanks, Gary |
|
|
Administrator
|
In reply to this post by viven44
Lens is a powerful tool when used for good. 😉
Unfortunately it's just as powerful used for evil. 👿
Jim,
Lil'Red is a '87 F250 HD, 4.10's, 1356 4x4, Zf-5, 3G, PMGR, Saginaw PS, desmogged with a Holley 80508 and Performer intake. Too much other stuff to mention. |
| Edit this page |
