Bullnose Enthusiasts Forum

Won't start after column swap

Classic

List

Threaded

3 messages Options

User811780

Won't start after column swap

I swapped in a new steering column but now when I turn the key all the accessories turn on but the engine won't turn over. I can jump the relay with the key in to get it to start but nothing with just turning the key.

1981 F150 4WD 300 I6 C6 Regular Cab Long Bed

Gary Lewis

Re: Won't start after column swap

Administrator

My first guess is that the ignition switch is out of adjustment. Go to Documentation/Electrical/Ignition in the menu and then the Ignition Switch tab. There you'll find instructions on adjusting the switch, which is about half way down on the column.

Gary, AKA "Gary fellow": Profile

Dad's: '81 F150 Ranger XLT 4x4: Down for restomod: Full-roller "stroked 351M" w/Trick Flow heads & intake, EEC-V SEFI/E4OD/3.50 gears w/Kevlar clutches
Blue: 2015 F150 Platinum 4x4 SuperCrew wearing Blue Jeans & sporting a 3.5L EB & Max Tow
Big Blue: 1985 F250HD 4x4: 460/ZF5/3.55's, D60 w/Ox locker & 10.25 Sterling/Trutrac, Blue Top & Borgeson, & EEC-V MAF/SEFI

User811780

Re: Won't start after column swap

Will do, thanks Gary!

1981 F150 4WD 300 I6 C6 Regular Cab Long Bed