Bullnose Enthusiasts Forum

What is This Connector Called?

Classic

List

Threaded

11 messages Options

Quarterwave

What is This Connector Called?

This looks like the connector that needs to go on a temperature sender that I just purchased for my 351W.

I have all the other stuff I need (heat shrink, heat gun etc...) to make a nice, new connection, but cannot find out what this type of connector is called &/or where to buy the basic unit from (without the wire).

1985 Ford F150, 2WD.
351 H.O Windsor, aluminum heads
Cam: Lift = .496''/.520'' Duration @ .050: 224°/234°
C6 Transmission
6" Rough Country Lift
33x12.5x15 BF Goodrich All-Terrains
15x10" Pro Comp Rims

kramttocs

Re: What is This Connector Called?

Administrator

This post was updated on .

A lot of places call it a "90 Degree Single Contact Female Molded Connector" but you are correct - I am not seeing a place to get just the innards

Google jtt2500h or MC-1-ANGLE as those where both the full boot part I found on two different sites

Scott
'Camano' 1986 F250 Supercab XLT Lariat 460/C6
'Chanute' 1980 F350 C&C 400/NP 435 - Gin Pole

But there ain't nothin' wrong with the radio

kramttocs

Re: What is This Connector Called?

Administrator

In reply to this post by Quarterwave

What about soldering and heat shrinking onto a premade unit?
In which case you could get the end from a jy harness for cheap.

Scott
'Camano' 1986 F250 Supercab XLT Lariat 460/C6
'Chanute' 1980 F350 C&C 400/NP 435 - Gin Pole

But there ain't nothin' wrong with the radio

Steve83

Re: What is This Connector Called?

Banned User

In reply to this post by Quarterwave

Quarterwave wrote

...what this type of connector is called...

"Female bullet" or "barrel'.

ArdWrknTrk

Re: What is This Connector Called?

Administrator

In reply to this post by Quarterwave

Gary has the Motorcraft connectors and pigtails catalog up in the documentation.

It's sorted by number of contacts, and has pictures of all the pinouts & locking clips.

Maybe this is related to the 'catalog' thing, like LMC?

ETA, same connector as the starter relay?
I think the choke connector is a bigger bullet.

Jim,
Lil'Red is a '87 F250 HD, 4.10's, 1356 4x4, Zf-5, 3G, PMGR, Saginaw PS, desmogged with a Holley 80508 and Performer intake.
Too much other stuff to mention.

Gary Lewis

Re: What is This Connector Called?

Administrator

Using the Ford connector catalog it looks like it is:

Googling 3U2Z-14S411-NRA I get to this set of results. And in the pics there's this one from Home Depot - Motorcraft Engine Coolant Temperature Sending Unit Switch Connector. However, this NOS FORD HARDWARE WIRING PIGTAIL KIT PART NUMBER 3U2Z-14S411-NRA NEW from eBay looks to be the same for a lot less money.

Gary, AKA "Gary fellow": Profile

Dad's: '81 F150 Ranger XLT 4x4: Down for restomod: Full-roller "stroked 351M" w/Trick Flow heads & intake, EEC-V SEFI/E4OD/3.50 gears w/Kevlar clutches
Blue: 2015 F150 Platinum 4x4 SuperCrew wearing Blue Jeans & sporting a 3.5L EB & Max Tow
Big Blue: 1985 F250HD 4x4: 460/ZF5/3.55's, D60 w/Ox locker & 10.25 Sterling/Trutrac, Blue Top & Borgeson, & EEC-V MAF/SEFI

81f100custom

Re: What is This Connector Called?

Here it is also at RockAuto.
https://www.rockauto.com/en/parts/motorcraft,WPT476,temperature+sender+/+sensor+connector,2564

Eddie,
81 F100 Custom SWB, 5.0L, 4x2, Single Rail Four-Speed Overdrive, 3.00 Non-Limited Slip Rear Axle, Non A/C truck to complete 85 F150 factory A/C conversion, Nutmeg interior color.

ArdWrknTrk

Re: What is This Connector Called?

Administrator

Yikes!!!

Jim,
Lil'Red is a '87 F250 HD, 4.10's, 1356 4x4, Zf-5, 3G, PMGR, Saginaw PS, desmogged with a Holley 80508 and Performer intake.
Too much other stuff to mention.

Gary Lewis

Re: What is This Connector Called?

Administrator

Yup. Here's the pics shown in the search link above. Quite a range of prices. I think I like the eBay one.

(Don't expect any of those links to work - it is just a picture.

)

Gary, AKA "Gary fellow": Profile

Steve83

Re: What is This Connector Called?

Banned User

Gary Lewis wrote

Quite a range of prices.

$0.09 each, and you'll have plenty left over to do speakers, or anything else:

https://www.amazon.com/dp/B07L5LYHBX

If you peel the insulation, it can be bent 90°, and then heat-shrunk (a few layers, if necessary) to make it look like the original one.

ArdWrknTrk

Re: What is This Connector Called?

Administrator

In reply to this post by Gary Lewis

I always try to keep a variety of oddball connectors in my loom toolbox.

Twins, flags, piggybacks, transitions between gauge or fitting style. Blade to bullet for example.

Jim,
Lil'Red is a '87 F250 HD, 4.10's, 1356 4x4, Zf-5, 3G, PMGR, Saginaw PS, desmogged with a Holley 80508 and Performer intake.
Too much other stuff to mention.