Bullnose Enthusiasts Forum › Marketplace › Want To Buy

WTB Lower Passenger Door Molding - FOUND

Classic

List

Threaded

6 messages Options

salans7

WTB Lower Passenger Door Molding - FOUND

This post was updated on .

I'm looking for the lower passenger side door trim molding for a 1980 truck or Bronco. It needs to be the early raised style as shown in the picture below:

Thanks!

Gary Lewis

Re: WTB Lower Passenger Door Molding - 1980 Raised Version

Administrator

I wish you good luck.

As you know, there's not that much of that stuff around.

Gary, AKA "Gary fellow": Profile

Dad's: '81 F150 Ranger XLT 4x4: Down for restomod: Full-roller "stroked 351M" w/Trick Flow heads & intake, EEC-V SEFI/E4OD/3.50 gears w/Kevlar clutches
Blue: 2015 F150 Platinum 4x4 SuperCrew wearing Blue Jeans & sporting a 3.5L EB & Max Tow
Big Blue: 1985 F250HD 4x4: 460/ZF5/3.55's, D60 w/Ox locker & 10.25 Sterling/Trutrac, Blue Top & Borgeson, & EEC-V MAF/SEFI

Ford F834

Re: WTB Lower Passenger Door Molding - 1980 Raised Version

Administrator

In reply to this post by salans7

I will keep an eye out… but man, you don’t see that early trim very often. I have seen it and hated to pass it up, but I have not needed it.

SHORT BED 4-DOOR DIESEL: 1986 F350 4x4 under construction-- 7.3 IDIT ZF5+GVOD

STRAIGHT SIX 4X4: 1981 F150 2wd to 4x4-- 300 I6 close ratio diesel T19, hydroboost brakes, Saginaw steering

BIG F: 1995 F-Superduty under construction— converting to 6.9L IDI diesel ZF5+DNE2

salans7

Re: WTB Lower Passenger Door Molding - 1980 Raised Version

There's one on Ebay currently, but it's $150 which is way more than I'm willing to pay.

I know it'll be a tough find, but I'm pretty good at pestering junkyards from Ebay listings so we'll see what I come up with.

I will say that if I decide to put trim moldings on my F350, I'm doing the 81-86 style.

salans7

Re: WTB Lower Passenger Door Molding - 1980 Raised Version -FOUND

Just to update this thread, Scott (kramttocs) was able to find one in a salvage yard for me. Thanks Scott!

Gary Lewis

Re: WTB Lower Passenger Door Molding - 1980 Raised Version -FOUND

Administrator

Well done, Scott! (This might be my last post on the Nabble forum. Should be # 40,836.)

Gary, AKA "Gary fellow": Profile