Administrator
|
This thread is so you can suggest vendors to review as well as for you to suggest changes in the structure or process of reviewing.
Gary, AKA "Gary fellow": Profile
Dad's: '81 F150 Ranger XLT 4x4: Down for restomod: Full-roller "stroked 351M" w/Trick Flow heads & intake, EEC-V SEFI/E4OD/3.50 gears w/Kevlar clutches
|
Gary,
Speaking of vendors, whatever happened to Keith Dickson? Has anybody talked to him recently? The only time I ever see or hear of him is when somebody on Facebook uses the term Stepside...lol. He polices that stuff pretty hard, but I haven't seen him much otherwise.
1994 F150 4x2 Flareside. 5.0 w/MAF, 4R70W, stock.
1984 F150 4X2 Flareside. Mild 302 w/ 5spd. Sold. 1980 F150 4X4 Flareside. 300i6 w/ 5spd. Sold in 2021. 1980 F100 4X2 Flareside. 351w/2bbl w/NP435. Sold in 1995 |
Administrator
|
LOL! I was sending him a note via his official LMC email address when you asked, so included a link to your question. We'll see what he says.
But the note I was sending was to let him know about the ratings and reviews effort. Thought he, as "Mr Ford" at LMC, would want to know. I'll probably do the same with each of the vendors as we get more ratings or reviews as they need to know how they are perceived. And, I'll offer to add their response they might have to the reviews.
Gary, AKA "Gary fellow": Profile
Dad's: '81 F150 Ranger XLT 4x4: Down for restomod: Full-roller "stroked 351M" w/Trick Flow heads & intake, EEC-V SEFI/E4OD/3.50 gears w/Kevlar clutches
|
Administrator
|
Is Amazon a 'vendor' ???
Can we have U-techcenter, and the major chains: NAPA, CarQuest, AutoZone, Advance, O'rielly, etc? Sorry smaller companies like RJM and Terripan are no longer around to spread the word. I want to toss out Pico Wiring Products too! They seem to have a lot of Ford stuff across all lines and generations.
Jim,
Lil'Red is a '87 F250 HD, 4.10's, 1356 4x4, Zf-5, 3G, PMGR, Saginaw PS, desmogged with a Holley 80508 and Performer intake. Too much other stuff to mention. |
Administrator
|
SKY off road???
I haven't bought from them, but I think it would be of interest here. L&L are purveyors of a lot of 460 swap parts. Members seem interested in that..
Jim,
Lil'Red is a '87 F250 HD, 4.10's, 1356 4x4, Zf-5, 3G, PMGR, Saginaw PS, desmogged with a Holley 80508 and Performer intake. Too much other stuff to mention. |
Administrator
|
In reply to this post by ArdWrknTrk
Amazon is as much a vendor as LMC, NPD, and the others of that ilk are.
On U-techcenter, can you give me a url? I tried to look them up as I want to put a link in the post/poll but didn't find a good one. Is this a good link to Pico Wiring Products? And I can also add NAPA, CarQuest, AutoZone, Advance, O'Rielly's, etc in. And Sky & L&L. This could take some time, but I'll get started. Thanks.
Gary, AKA "Gary fellow": Profile
Dad's: '81 F150 Ranger XLT 4x4: Down for restomod: Full-roller "stroked 351M" w/Trick Flow heads & intake, EEC-V SEFI/E4OD/3.50 gears w/Kevlar clutches
|
Administrator
|
I think Pico has a catalog online later than 2016, but obviously the page was done in 1996.
The more I think about it, the less I feel like we need polls for the big 5, or 6... Plenty of those stores are franchised and experiences vary wildly. Just because there's one sour apple in the barrel...... But L&L and SKY are both singular entities, so apples to apples there.
Jim,
Lil'Red is a '87 F250 HD, 4.10's, 1356 4x4, Zf-5, 3G, PMGR, Saginaw PS, desmogged with a Holley 80508 and Performer intake. Too much other stuff to mention. |
Any u pick places around?? A list of bullnosed parts vehicles might be timely. See one, post a pic...
1986 f350 Ambulance convert
2WD project phase 460 v8 Low miles |
In reply to this post by ArdWrknTrk
Any u pick places around?? A list of bullnosed parts vehicles might be timely. See one, post a pic...
1986 f350 Ambulance convert
2WD project phase 460 v8 Low miles |
Administrator
|
John - The vendor rating/review area is for national if not international vendors. But u-pick places are frequently regional or just local, so don't belong in here.
And a list of Bullnose parts vehicles is not a vendor, so doesn't belong either. But you are free to start a thread in the main section asking for u-pick places or parts vehicle lists.
Gary, AKA "Gary fellow": Profile
Dad's: '81 F150 Ranger XLT 4x4: Down for restomod: Full-roller "stroked 351M" w/Trick Flow heads & intake, EEC-V SEFI/E4OD/3.50 gears w/Kevlar clutches
|
Administrator
|
Done
Gary, AKA "Gary fellow": Profile
Dad's: '81 F150 Ranger XLT 4x4: Down for restomod: Full-roller "stroked 351M" w/Trick Flow heads & intake, EEC-V SEFI/E4OD/3.50 gears w/Kevlar clutches
|
Administrator
|
In reply to this post by Gary Lewis
AC/DC Wire and Supply
https://www.ebay.com/str/acdcwireandsupply https://www.acdcwireandsupply.com/ Thanks
Scott
'Camano' 1986 F250 Supercab XLT Lariat 460/C6 'Chanute' 1980 F350 C&C 400/NP 435 - Gin Pole But there ain't nothin' wrong with the radio |
MillSupply.com for body panels. It seemed that overseas shipping was much cheaper in comparison to LMC.
Jeep Grand Wagoneer AMC 5.9L (LPG injection, DIS ignition fully electronic EFI DIY design & build)
1982 F250 4x4 351W super cab, long bed |
In reply to this post by Gary Lewis
Hi Gary. I would love to offer feedback on JB Custom Fabrication, James Duff, CVF Racing, Desolate Motorsports, and Partsmike.com.
LittleBeefy aka Chad
“Dot Doitall”: 1984 Bronco XLT 460 (C8VE), Edelbrock Pro-Flo 4, ZF5, NP205, D44HP solid axle, 4.56 urban assault vehicle "Bebe": 2022 Bronco Badlands 2dr 2.7l, Sasquatch, Iconic Silver, Black Marine-grade interior, hard-top "Celeste": 1979 Porsche 928 4.5l K-jet, 5-sp, S4/GTS brakes, LSD, Pasha interior |
Administrator
|
Chad - I'll set that up later this evening. (Right now I'm "playing" with some bucket seats that found there way here. Turns out they mount different from the captain's chairs I have. )
Gary, AKA "Gary fellow": Profile
Dad's: '81 F150 Ranger XLT 4x4: Down for restomod: Full-roller "stroked 351M" w/Trick Flow heads & intake, EEC-V SEFI/E4OD/3.50 gears w/Kevlar clutches
|
Administrator
|
In reply to this post by kramttocs
Ok guys, I'm going to tag all three of you. Somehow I missed that you asked for these. The are out there now and I just have to put them in order...
Gary, AKA "Gary fellow": Profile
Dad's: '81 F150 Ranger XLT 4x4: Down for restomod: Full-roller "stroked 351M" w/Trick Flow heads & intake, EEC-V SEFI/E4OD/3.50 gears w/Kevlar clutches
|
Hi Gary, could you add Superior CB to the review list please?
Thank you!
Dane
1986 F250HD SC XLT Lariat 4x4 460 C6-Sold 1992 Bronco XLT 4x4 351W E4OD 1998 GMC Sierra SLE K1500 350 4L60E Arizona |
Administrator
|
I can pin a topic Dane, but I don't have any experience with them so it's up to you to follow thru.
Jim,
Lil'Red is a '87 F250 HD, 4.10's, 1356 4x4, Zf-5, 3G, PMGR, Saginaw PS, desmogged with a Holley 80508 and Performer intake. Too much other stuff to mention. |
Administrator
|
Jim - Can you edit your post and put a poll in it as the others have? Or I could delete yours and add one with a poll if that would be easier. I think I'll have a while to do that at my son's house today.
Gary, AKA "Gary fellow": Profile
Dad's: '81 F150 Ranger XLT 4x4: Down for restomod: Full-roller "stroked 351M" w/Trick Flow heads & intake, EEC-V SEFI/E4OD/3.50 gears w/Kevlar clutches
|
Edit this page |