Tool To Remove Headlight & Wiper Knobs

classic Classic list List threaded Threaded
83 messages Options
12345
Reply | Threaded
Open this post in threaded view
|

Re: Tool To Remove Headlight & Wiper Knobs

Ifitaintbroke
I've heard, though I've not met any, that down in the Okefenokee Swamp (I've been there many times), there are actually people living there. They are (supposedly) of mostly English descent, and spoke a dialect close to the English of the Elizabethan era, well into the last century. They are called swampers.
Bradley
86 f250 supercab longbed, 4x4, 460 bored to 472 cubes, ported heads, ARP rod bolts, EFI pistons, 5.08/5.41 lift 114° lobe separation flat tappet cam, notched lifters, Smith Brothers pushrods, stock rockers, Eddy Performer intake, Holley 1850 or 3310 depending on mood, custom curved points dizzy, MSD analog 6al triggered by Pertronix module, zf5 swap, 3g alternator, custom instrument cluster, dual tanks with 38 Gal rear for 57 Gal of fuel capacity, far too much more to mention.

98 Ranger standard cab, rwd, 5-speed, 2.5L, glass pack muffler, dual plugs wired to fire at the same time, coming up on 300,000 miles before too long.

Averaging 26-27 mpg.

South Georgia.
Reply | Threaded
Open this post in threaded view
|

Re: Tool To Remove Headlight & Wiper Knobs

ArdWrknTrk
Administrator
In reply to this post by Ifitaintbroke
My first stepmother was South African (this was in the days of apartheid)

She was white as rice but realized that if she filled out 'African American' all kinds doors opened up for her!  
 Jim,
Lil'Red is a '87 F250 HD, 4.10's, 1356 4x4, Zf-5, 3G, PMGR, Saginaw PS, desmogged with a Holley 80508 and Performer intake.
Too much other stuff to mention.
Reply | Threaded
Open this post in threaded view
|

Re: Tool To Remove Headlight & Wiper Knobs

Ifitaintbroke
In reply to this post by viven44
Wow, in India manuals are still the standard?
Bradley
86 f250 supercab longbed, 4x4, 460 bored to 472 cubes, ported heads, ARP rod bolts, EFI pistons, 5.08/5.41 lift 114° lobe separation flat tappet cam, notched lifters, Smith Brothers pushrods, stock rockers, Eddy Performer intake, Holley 1850 or 3310 depending on mood, custom curved points dizzy, MSD analog 6al triggered by Pertronix module, zf5 swap, 3g alternator, custom instrument cluster, dual tanks with 38 Gal rear for 57 Gal of fuel capacity, far too much more to mention.

98 Ranger standard cab, rwd, 5-speed, 2.5L, glass pack muffler, dual plugs wired to fire at the same time, coming up on 300,000 miles before too long.

Averaging 26-27 mpg.

South Georgia.
Reply | Threaded
Open this post in threaded view
|

Re: Tool To Remove Headlight & Wiper Knobs

Ifitaintbroke
In reply to this post by ArdWrknTrk
Never thought of that. Seems like that would raise some eyebrows.
Bradley
86 f250 supercab longbed, 4x4, 460 bored to 472 cubes, ported heads, ARP rod bolts, EFI pistons, 5.08/5.41 lift 114° lobe separation flat tappet cam, notched lifters, Smith Brothers pushrods, stock rockers, Eddy Performer intake, Holley 1850 or 3310 depending on mood, custom curved points dizzy, MSD analog 6al triggered by Pertronix module, zf5 swap, 3g alternator, custom instrument cluster, dual tanks with 38 Gal rear for 57 Gal of fuel capacity, far too much more to mention.

98 Ranger standard cab, rwd, 5-speed, 2.5L, glass pack muffler, dual plugs wired to fire at the same time, coming up on 300,000 miles before too long.

Averaging 26-27 mpg.

South Georgia.
Reply | Threaded
Open this post in threaded view
|

Re: Tool To Remove Headlight & Wiper Knobs

ArdWrknTrk
Administrator
This post was updated on .
But, it was absolutely true...  
Estelle raised a LOT of eyebrows, but I won't tell.
"I'm banned from attending State functions at the White House"
She's found Jesus Christ, and lives a quiet life in Reno.
 Jim,
Lil'Red is a '87 F250 HD, 4.10's, 1356 4x4, Zf-5, 3G, PMGR, Saginaw PS, desmogged with a Holley 80508 and Performer intake.
Too much other stuff to mention.
Reply | Threaded
Open this post in threaded view
|

Re: Tool To Remove Headlight & Wiper Knobs

viven44
In reply to this post by Ifitaintbroke
20 years ago, I had never seen a car with an Automatic transmission.

Today, from what I understand it is available in many models in much of the 3rd world. There is significant traffic congestion, unlike anything here, animals sharing the roadways... it is a different world and the speeds are also a lot lower... fuel costs are ridiculous vs. the USA so the driver might need to optimize driving based on the variables... so I guess manuals make more sense? As automatic transmissions have come a long way with more gears, less servicing... not sure where things will be heading in the future... But I do know one thing. the 3rd world nations do follow the same trajectory as the 1st world nations, just takes longer to get there.
Vivek

- BB 2WD - 1984 F350 RWD 460/C6
- 1978 Bronco with a 460 from an 86 Bullnose/C6
Reply | Threaded
Open this post in threaded view
|

Re: Tool To Remove Headlight & Wiper Knobs

ArdWrknTrk
Administrator
I'd opine that fuel costs in the US are ridiculous, compared to the rest of the world (1st, 2nd and 3rd)
But that's what you get from global hedgemony.
 Jim,
Lil'Red is a '87 F250 HD, 4.10's, 1356 4x4, Zf-5, 3G, PMGR, Saginaw PS, desmogged with a Holley 80508 and Performer intake.
Too much other stuff to mention.
Reply | Threaded
Open this post in threaded view
|

Re: Tool To Remove Headlight & Wiper Knobs

viven44
This post was updated on .
Current petrol cost in India is 104INR/Liter which translates to $5/gallon. Average engineer in India makes <10K USD per year. The only way survival is possible in that situation is by driving severely underpowered cars or motorbikes. Most engineers can't afford a car, that's another story... We took my wife's family over there for our wedding. It was a significant reality check for them on how blessed they were to be born in the US.
Vivek

- BB 2WD - 1984 F350 RWD 460/C6
- 1978 Bronco with a 460 from an 86 Bullnose/C6
Reply | Threaded
Open this post in threaded view
|

Re: Tool To Remove Headlight & Wiper Knobs

ArdWrknTrk
Administrator
"Wake up white people!"
The planet does not revolve around you.
 Jim,
Lil'Red is a '87 F250 HD, 4.10's, 1356 4x4, Zf-5, 3G, PMGR, Saginaw PS, desmogged with a Holley 80508 and Performer intake.
Too much other stuff to mention.
Reply | Threaded
Open this post in threaded view
|

Re: Tool To Remove Headlight & Wiper Knobs

Ifitaintbroke
In reply to this post by ArdWrknTrk
And that's the only answer to anything.
Bradley
86 f250 supercab longbed, 4x4, 460 bored to 472 cubes, ported heads, ARP rod bolts, EFI pistons, 5.08/5.41 lift 114° lobe separation flat tappet cam, notched lifters, Smith Brothers pushrods, stock rockers, Eddy Performer intake, Holley 1850 or 3310 depending on mood, custom curved points dizzy, MSD analog 6al triggered by Pertronix module, zf5 swap, 3g alternator, custom instrument cluster, dual tanks with 38 Gal rear for 57 Gal of fuel capacity, far too much more to mention.

98 Ranger standard cab, rwd, 5-speed, 2.5L, glass pack muffler, dual plugs wired to fire at the same time, coming up on 300,000 miles before too long.

Averaging 26-27 mpg.

South Georgia.
Reply | Threaded
Open this post in threaded view
|

Re: Tool To Remove Headlight & Wiper Knobs

ArdWrknTrk
Administrator
Christ the Savior.
(we aren't supposed to talk about religion here, sorry)
 Jim,
Lil'Red is a '87 F250 HD, 4.10's, 1356 4x4, Zf-5, 3G, PMGR, Saginaw PS, desmogged with a Holley 80508 and Performer intake.
Too much other stuff to mention.
Reply | Threaded
Open this post in threaded view
|

Re: Tool To Remove Headlight & Wiper Knobs

85lebaront2
Administrator
In reply to this post by Ifitaintbroke
Southeastern Gloucester County in Virginia, there is an area know as "Guinea Neck". The speak a dialect that is mostly Elizabethan English. There is a lot of intermarriage there and definite evidence of inbreeding.

Where I am living now there are a few very common last names some of whom are descended from the first settlers who came to the Eastern Shore in the 17th century.
Bill AKA "LOBO" Profile

"Getting old is inevitable, growing up is optional" Darth Vader 1986 F350 460 converted to MAF/SEFI, E4OD 12X3 1/2 rear brakes, traction loc 3:55 gear, 160 amp 3G alternator Wife's 2011 Flex Limited Daily Driver 2009 Flex Limited with factory tow package Project car 1986 Chrysler LeBaron convertible 2.2L Turbo II, modified A413

Reply | Threaded
Open this post in threaded view
|

Re: Tool To Remove Headlight & Wiper Knobs

ArdWrknTrk
Administrator
I know Brewster's.
They came over on the Mayflower...
 Jim,
Lil'Red is a '87 F250 HD, 4.10's, 1356 4x4, Zf-5, 3G, PMGR, Saginaw PS, desmogged with a Holley 80508 and Performer intake.
Too much other stuff to mention.
Reply | Threaded
Open this post in threaded view
|

Re: Tool To Remove Headlight & Wiper Knobs

Ifitaintbroke
My great great great great great great great grandfather, came over on the Mayflower. He got drunk and fell over board.
Bradley
86 f250 supercab longbed, 4x4, 460 bored to 472 cubes, ported heads, ARP rod bolts, EFI pistons, 5.08/5.41 lift 114° lobe separation flat tappet cam, notched lifters, Smith Brothers pushrods, stock rockers, Eddy Performer intake, Holley 1850 or 3310 depending on mood, custom curved points dizzy, MSD analog 6al triggered by Pertronix module, zf5 swap, 3g alternator, custom instrument cluster, dual tanks with 38 Gal rear for 57 Gal of fuel capacity, far too much more to mention.

98 Ranger standard cab, rwd, 5-speed, 2.5L, glass pack muffler, dual plugs wired to fire at the same time, coming up on 300,000 miles before too long.

Averaging 26-27 mpg.

South Georgia.
Reply | Threaded
Open this post in threaded view
|

Re: Tool To Remove Headlight & Wiper Knobs

BigBrother-84
Boy!
I suppose they grab him back aboard, since he had (at least one) descendants.
Jeff / 1984 F350 Crew Cab 4x4/5.8L w351 4V/ T18/ D50 4.10 front/ 8' bed.
Restored 2019-2022.
Nicknamed «Big Brother 1984», due to its soooo-looong shape & nod to George Orwell's 1984 famous novel.
Reply | Threaded
Open this post in threaded view
|

Re: Tool To Remove Headlight & Wiper Knobs

ArdWrknTrk
Administrator
They were Puritans.
It's:
A) amazing there are any left.
B) no wonder why this country is so hung up about something every animal does.
 Jim,
Lil'Red is a '87 F250 HD, 4.10's, 1356 4x4, Zf-5, 3G, PMGR, Saginaw PS, desmogged with a Holley 80508 and Performer intake.
Too much other stuff to mention.
Reply | Threaded
Open this post in threaded view
|

Re: Tool To Remove Headlight & Wiper Knobs

Ifitaintbroke
In reply to this post by BigBrother-84
Yes, he caught hold of some rigging and made it back aboard.
Bradley
86 f250 supercab longbed, 4x4, 460 bored to 472 cubes, ported heads, ARP rod bolts, EFI pistons, 5.08/5.41 lift 114° lobe separation flat tappet cam, notched lifters, Smith Brothers pushrods, stock rockers, Eddy Performer intake, Holley 1850 or 3310 depending on mood, custom curved points dizzy, MSD analog 6al triggered by Pertronix module, zf5 swap, 3g alternator, custom instrument cluster, dual tanks with 38 Gal rear for 57 Gal of fuel capacity, far too much more to mention.

98 Ranger standard cab, rwd, 5-speed, 2.5L, glass pack muffler, dual plugs wired to fire at the same time, coming up on 300,000 miles before too long.

Averaging 26-27 mpg.

South Georgia.
Reply | Threaded
Open this post in threaded view
|

Re: Tool To Remove Headlight & Wiper Knobs

ArdWrknTrk
Administrator
Interesting
I thought Puritan's were teatotaler's.
 Jim,
Lil'Red is a '87 F250 HD, 4.10's, 1356 4x4, Zf-5, 3G, PMGR, Saginaw PS, desmogged with a Holley 80508 and Performer intake.
Too much other stuff to mention.
Reply | Threaded
Open this post in threaded view
|

Re: Tool To Remove Headlight & Wiper Knobs

Ifitaintbroke
I've not found evidence that he was a puritan. Remember, there were several groups that came on the Mayflower. He was an indentured servant, so it possible that he had no choice in coming over. Another consideration is that this event took place well into the voyage, and it's possible that they had run out of water by that time and had nothing left but alcohol. But those are just my theories. Some accounts of the event state that he was not drunk, but fell overboard because they were in a storm. The official government records in my family's possession state that he was intoxicated.
Bradley
86 f250 supercab longbed, 4x4, 460 bored to 472 cubes, ported heads, ARP rod bolts, EFI pistons, 5.08/5.41 lift 114° lobe separation flat tappet cam, notched lifters, Smith Brothers pushrods, stock rockers, Eddy Performer intake, Holley 1850 or 3310 depending on mood, custom curved points dizzy, MSD analog 6al triggered by Pertronix module, zf5 swap, 3g alternator, custom instrument cluster, dual tanks with 38 Gal rear for 57 Gal of fuel capacity, far too much more to mention.

98 Ranger standard cab, rwd, 5-speed, 2.5L, glass pack muffler, dual plugs wired to fire at the same time, coming up on 300,000 miles before too long.

Averaging 26-27 mpg.

South Georgia.
Reply | Threaded
Open this post in threaded view
|

Re: Tool To Remove Headlight & Wiper Knobs

derek
In reply to this post by BigBrother-84
BigBrother-84 wrote
Gary Lewis wrote
Today I had the "pleasure" to again remove the headlight and wiper knobs.  Heretofore I've used whatever tool might be to hand, but today I decided to make something that would do it easily.
I use a thin L shaped Allan key, it works pretty well.

Yep, ours had one of these in the ashtray when we got it, that's what I've used and it seems to work the best for me, especially compared to the other pointy hook tools that others are showing...  I'm curious to know now if Gary's works even better.. I may have to fabricate one of those the next time the dash has to come out.
1982 F-250HD 4x4: 400/C6, Borgeson/BlueTop, 3G Alternator
12345