Bullnose Enthusiasts Forum

Throttle bracket

Classic

List

Threaded

23 messages Options

old55pete

Re: Throttle bracket

salans7 wrote

old55pete wrote

There are a bunch of 460 powered vans there too, I will give them a look also. I find it strange that there are no part/ engineering numbers on this bracket

I've seen it a few times before so it doesn't surprise me.

Keep in mind that EFI trucks use a different bracket, so it has to be from a carbureted truck or van.

There arent any EFI 460's that I saw up there. There were some that had serpentine belt systems. Then again I dident look at the vans that hard ether.

Steve
86 Bronco, XLT, 5.0 EFI, EEC IV, AOD, IFS, limited slip front and rear, 3.08 gears, Tilt steering, factory AC

ArdWrknTrk

Re: Throttle bracket

Administrator

EFI started in '88.
They would be a Bricknose truck.

My '87 is V-belt, so I'm not sure there are any carbureted 460 trucks with polygroove belts.

Jim,
Lil'Red is a '87 F250 HD, 4.10's, 1356 4x4, Zf-5, 3G, PMGR, Saginaw PS, desmogged with a Holley 80508 and Performer intake.
Too much other stuff to mention.

Gary Lewis

Re: Throttle bracket

Administrator

ArdWrknTrk wrote

EFI started in '88.
They would be a Bricknose truck.

My '87 is V-belt, so I'm not sure there are any carbureted 460 trucks with polygroove belts from the factory.

Fixed it for you.

Gary, AKA "Gary fellow": Profile

Dad's: '81 F150 Ranger XLT 4x4: Down for restomod: Full-roller "stroked 351M" w/Trick Flow heads & intake, EEC-V SEFI/E4OD/3.50 gears w/Kevlar clutches
Blue: 2015 F150 Platinum 4x4 SuperCrew wearing Blue Jeans & sporting a 3.5L EB & Max Tow
Big Blue: 1985 F250HD 4x4: 460/ZF5/3.55's, D60 w/Ox locker & 10.25 Sterling/Trutrac, Blue Top & Borgeson, & EEC-V MAF/SEFI