Bullnose Enthusiasts Forum

Pex Door Striker Mod

Classic

List

Threaded

31 messages Options

ArdWrknTrk

Re: Pex Door Striker Mod

Administrator

Sounds like my flywheel/ring gear! 😖😡😭

Jim,
Lil'Red is a '87 F250 HD, 4.10's, 1356 4x4, Zf-5, 3G, PMGR, Saginaw PS, desmogged with a Holley 80508 and Performer intake.
Too much other stuff to mention.

Danny G

Re: Pex Door Striker Mod

In reply to this post by Bruno2

Did this on my truck with "Ford" blue 1/2inch PEX except I did it the cheaper way. Split it down the middle, used a part of pliers to slip it over. The pex seems to have enough memory to hold itself in place. What a world of difference it makes.

Not only is pex probably more durable than the doorman stuff. I got like a 5ft piece for $1.82 at lowes... That's a lot of sleeve.

1985 F-350 XL | 460 | C6 | "Rufus Maximus"
1986 F-150|Standard Cab|4x2|300Six|C6Transmission w/3.08 rear|Name:TBD
2021 Ranger XLT Super Crew | Cactus Grey | black out package | max tow

Gary Lewis

Re: Pex Door Striker Mod

Administrator

This reminds me that I need to get back w/the gal that runs the nearby salvage and see when I can go over and look for parts. Would like to pick up some of those strikers.

Brandon - Plans for Saturday?

Gary, AKA "Gary fellow": Profile

Dad's: '81 F150 Ranger XLT 4x4: Down for restomod: Full-roller "stroked 351M" w/Trick Flow heads & intake, EEC-V SEFI/E4OD/3.50 gears w/Kevlar clutches
Blue: 2015 F150 Platinum 4x4 SuperCrew wearing Blue Jeans & sporting a 3.5L EB & Max Tow
Big Blue: 1985 F250HD 4x4: 460/ZF5/3.55's, D60 w/Ox locker & 10.25 Sterling/Trutrac, Blue Top & Borgeson, & EEC-V MAF/SEFI

Bruno2

Re: Pex Door Striker Mod

Grandbaby's second bday party. Party starts at 10:45 will probably be by 12:45. I would like a longer day. Maybe weekend after?

Whitey: 1996 F 250 XL CCLB 4X4 7.3 DI ZF5 (The Work Horse) Lots of power mods
Whitey Jr: AKA Jr 1982 F 150 CCLB 4X4 351W C6 (Jr Work Horse) respectable power, but not over the top
The Bronco: 1987 Bronco XLT 351W C6 (needs work) Lots of off road mods and plenty of power mods
The Dodge: 2006 Ram 2500 CCSB 4X4 5.9 HO Cummins (The reliable ride that cant keep an AC in itself) (5th AC go around almost complete)

Gary Lewis

Re: Pex Door Striker Mod

Administrator

Weekend after is Janey's cousin's reunion at our house. And we have travel in December. How 'bout Dec 7th?

Gary, AKA "Gary fellow": Profile

Ford F834

Re: Pex Door Striker Mod

Administrator

In reply to this post by Gary Lewis

Gary Lewis wrote

The Bullnose trucks don't have that guard, although installing the later striker with the guard is a good upgrade.

What is the benefit of the guard, Gary?

Thanks Brandon for this thread!

SHORT BED 4-DOOR DIESEL: 1986 F350 4x4 under construction-- 7.3 IDIT ZF5+GVOD

STRAIGHT SIX 4X4: 1981 F150 2wd to 4x4-- 300 I6 close ratio diesel T19, hydroboost brakes, Saginaw steering

BIG F: 1995 F-Superduty under construction— converting to 6.9L IDI diesel ZF5+DNE2

Gary Lewis

Re: Pex Door Striker Mod

Administrator

Ford F834 wrote

What is the benefit of the guard, Gary?

My understand was that it keeps the seat belt/shoulder harness from getting caught on the striker and the door getting slammed on it. But I've not seen anything in writing to confirm that. Nor do I know where I heard it.

Gary, AKA "Gary fellow": Profile

Ford F834

Re: Pex Door Striker Mod

Administrator

Hmmm. I’ve not had a problem with the post, but the retractor is weak on mine and sometimes the buckle blade itself or the stiffener sheath by the floor end up in the door jamb. I didn’t particularly like the guard type but perhaps it is useful...

Danny G

Re: Pex Door Striker Mod

The guard has a radius to match the bolt, but does not touch it. Possibly for support if the bolt shifts during a hard close/impact to keep it from going to far? Like an over travel stop? I'm sure its like that for turning clearance, just shooting in the wind, I am curious of its purpose now.

1985 F-350 XL | 460 | C6 | "Rufus Maximus"
1986 F-150|Standard Cab|4x2|300Six|C6Transmission w/3.08 rear|Name:TBD
2021 Ranger XLT Super Crew | Cactus Grey | black out package | max tow

Vic Roma

Re: Pex Door Striker Mod

This is a bit cheeky; someone is selling the PEX mod on eBay, marketed as "striker bushing Alternative to Dorman"

https://www.ebay.com/itm/8x-Ford-door-lift-striker-bushing-Alternative-to-Dorman-38424-and-38445/223494244587?_trkparms=aid%3D1110004%26algo%3DSPLICE.COMP%26ao%3D1%26asc%3D20200220094952%26meid%3Ddd5a80aca5b74b7781024f58fbe2118a%26pid%3D100008%26rk%3D4%26rkt%3D12%26sd%3D383459458275%26itm%3D223494244587%26pmt%3D1%26noa%3D0%26pg%3D2047675%26algv%3Ddefault%26brand%3DUnbranded&_trksid=p2047675.c100008.m2219

1984 Bronco 351 Holley Sniper EFI, 3 Speed Ford Auto.
1986 Bronco 302 EFI, AOD, Eddie Bauer, with 3G alternator.

Rembrant

Re: Pex Door Striker Mod

Colorful too!

1994 F150 4x2 Flareside. 5.0 w/MAF, 4R70W, stock.
1984 F150 4X2 Flareside. Mild 302 w/ 5spd. Sold.
1980 F150 4X4 Flareside. 300i6 w/ 5spd. Sold in 2021.
1980 F100 4X2 Flareside. 351w/2bbl w/NP435. Sold in 1995