Improved HVAC blend door [as discussed on forum recently]

classic Classic list List threaded Threaded
10 messages Options
Reply | Threaded
Open this post in threaded view
|

Improved HVAC blend door [as discussed on forum recently]

1986F150Six
Administrator
Reply | Threaded
Open this post in threaded view
|

Re: Improved HVAC blend door [as discussed on forum recently]

ckuske
Administrator
Man, you're fast!  

I just sat down to post the item on eBay with a full cup of coffee, and I still have a half-cup and it's still warm!
Chris

'84 F-150 XL 2WD Flareside, 302 w/ AOD transmission, Motorcraft 2150 feedback carb w/ CA Emissions, EEC-IV w/TFI, factory A/C, Tilt Column, Borgeson/Bluetop Steering, Speed Control, 308,000+ miles - Info about me and my truck - My project thread
Reply | Threaded
Open this post in threaded view
|

Re: Improved HVAC blend door [as discussed on forum recently]

1986F150Six
Administrator
Gary will tell you that it has been said that I have a "gift"!

Reply | Threaded
Open this post in threaded view
|

Re: Improved HVAC blend door [as discussed on forum recently]

FuzzFace2
I see Ebay removed the link for the Deluxe kit door
Maybe the ad can be changed to "option with or with out hardware / seal" with the price change?
Dave ----
Dave G.
81 F100 flare side 300 six / AA OD / NP435 / 2.75 gear
http://cars.grantskingdom1.com/index.php/1980-Ford-F100?page=1
81 F100 style side 300 six/SROD parts truck -RIP
http://cars.grantskingdom1.com/index.php/1981-Ford-F100
Reply | Threaded
Open this post in threaded view
|

Re: Improved HVAC blend door [as discussed on forum recently]

ckuske
Administrator
Hi Dave,

I've never sold anything on eBay before as "retail", so I was starting with the "bare" door to test the waters.  I didn't see a way to add variations, so I would need to make another listing for the deluxe version.

If you'd like to get going before that, just hop on over to https://bullnosecreations.square.site/ where you can order either type.

I'll work on getting the deluxe version listed as well.

Thanks!

Chris
Chris

'84 F-150 XL 2WD Flareside, 302 w/ AOD transmission, Motorcraft 2150 feedback carb w/ CA Emissions, EEC-IV w/TFI, factory A/C, Tilt Column, Borgeson/Bluetop Steering, Speed Control, 308,000+ miles - Info about me and my truck - My project thread
Reply | Threaded
Open this post in threaded view
|

Re: Improved HVAC blend door [as discussed on forum recently]

FuzzFace2
I dont need one but I am really thinking of getting one to have on hand just in case.

But I wanted to let you know what Ebay did, removed the link.
I have never sold anything on the "bay" but have seen how others posted items and thought maybe you could do the same but another post for the 2nd door option works also.
Dave ----
Dave G.
81 F100 flare side 300 six / AA OD / NP435 / 2.75 gear
http://cars.grantskingdom1.com/index.php/1980-Ford-F100?page=1
81 F100 style side 300 six/SROD parts truck -RIP
http://cars.grantskingdom1.com/index.php/1981-Ford-F100
Reply | Threaded
Open this post in threaded view
|

Re: Improved HVAC blend door [as discussed on forum recently]

RacingFan
In reply to this post by ckuske
On my '86 the temp slider will only move about an inch so it's never cold nor hot. Would this blend door fix the issue or is that rooted somewhere else?

Thanks!
Wayne
1986 F150, SuperCab. 5.0 EFI, factory A/C, 4 speed manual, 4x4, 8' bed, factory dual tanks
Reply | Threaded
Open this post in threaded view
|

Re: Improved HVAC blend door [as discussed on forum recently]

ckuske
Administrator
This post was updated on .
In reply to this post by FuzzFace2
Sorry Dave, I totally missed this.  I should have had an email subscription set up for this thread.  I have been getting most of my sales through eBay.  I think I will add another listing for the "deluxe" version.

I have had to bump the price up a little bit, eBay takes a big chunk out of each sale for fees.

Here is the updated listing: https://www.ebay.com/itm/195725950613

I also put a second listing up for the Deluxe version:

https://www.ebay.com/itm/195728072421

Chris

'84 F-150 XL 2WD Flareside, 302 w/ AOD transmission, Motorcraft 2150 feedback carb w/ CA Emissions, EEC-IV w/TFI, factory A/C, Tilt Column, Borgeson/Bluetop Steering, Speed Control, 308,000+ miles - Info about me and my truck - My project thread
Reply | Threaded
Open this post in threaded view
|

Re: Improved HVAC blend door [as discussed on forum recently]

ckuske
Administrator
In reply to this post by RacingFan
Hi Wayne,

It won't, sorry.  The term "blend door" is a bit of a misnomer.  I've seen it referred to as several different things.  

There is a separate cable which controls the mix of warm and cold(er) air.  The door mentioned here controls the routing of air to the vents vs the defroster.
Chris

'84 F-150 XL 2WD Flareside, 302 w/ AOD transmission, Motorcraft 2150 feedback carb w/ CA Emissions, EEC-IV w/TFI, factory A/C, Tilt Column, Borgeson/Bluetop Steering, Speed Control, 308,000+ miles - Info about me and my truck - My project thread
Reply | Threaded
Open this post in threaded view
|

Re: Improved HVAC blend door [as discussed on forum recently]

RacingFan
Hi Chris,
That's what I suspected but thought I'd ask anyway.
Thanks for the info, I'll dig into the cabling side.

Wayne
Wayne
1986 F150, SuperCab. 5.0 EFI, factory A/C, 4 speed manual, 4x4, 8' bed, factory dual tanks