Bullnose Enthusiasts Forum

Ignition Lock Cylinder: Any brand preference, good, bad, ugly?

Classic

List

Threaded

8 messages Options

Starliner

Ignition Lock Cylinder: Any brand preference, good, bad, ugly?

This post was updated on .

Maybe some have you have replaced your lock cylinder and come across no problems, or brands to stay clear of. Any recommendations?
Thanks.

JOE

1983 F150 XL Flareside, Shortbed.
4 X 4, auto, 351w, 4bbl added.

"It's hip to be square."

ArdWrknTrk

Re: Ignition Lock Cylinder: Any brand preference, good, bad, ugly?

Administrator

Well, I'm sure Motorcraft would be good.

I have Standard Automotive Products cylinders in ignition and doors.
(I upgraded to later door cylinders so I have the same key for all

)

10/10 would recommend.

Jim,
Lil'Red is a '87 F250 HD, 4.10's, 1356 4x4, Zf-5, 3G, PMGR, Saginaw PS, desmogged with a Holley 80508 and Performer intake.
Too much other stuff to mention.

85lebaront2

Re: Ignition Lock Cylinder: Any brand preference, good, bad, ugly?

Administrator

In reply to this post by Starliner

I have had good luck with Dorman replacements on my Chrysler. I just buy the ignition cylinder and re-pin the door locks (mine has a halo illuminated door cylinder).

Bill AKA "LOBO" Profile

"Getting old is inevitable, growing up is optional" Darth Vader 1986 F350 460 converted to MAF/SEFI, E4OD 12X3 1/2 rear brakes, traction loc 3:55 gear, 160 amp 3G alternator Wife's 2011 Flex Limited Daily Driver 2009 Flex Limited with factory tow package Project car 1986 Chrysler LeBaron convertible 2.2L Turbo II, modified A413

ArdWrknTrk

Re: Ignition Lock Cylinder: Any brand preference, good, bad, ugly?

Administrator

But on these trucks the bitting is opposite, so you need the oval key.

Later trucks use only one (square) key.

Jim,
Lil'Red is a '87 F250 HD, 4.10's, 1356 4x4, Zf-5, 3G, PMGR, Saginaw PS, desmogged with a Holley 80508 and Performer intake.
Too much other stuff to mention.

Starliner

Re: Ignition Lock Cylinder: Any brand preference, good, bad, ugly?

Ok, good info thanks.
There is alot of crap out there.

JOE

1983 F150 XL Flareside, Shortbed.
4 X 4, auto, 351w, 4bbl added.

"It's hip to be square."

swampedout

Re: Ignition Lock Cylinder: Any brand preference, good, bad, ugly?

I have one of the cheap ones from one of those parts stores I wont name and its held up for a couple months.
I bypassed the starter to its own switch, though, because my last ign lock broke at the bottom pin due to being overcranked. Theres many weak links in the column

Sam
1984 F250. 460. C6. 4x4.
MSD Ignition. Airbag rear suspension
Whole buncha problems

Starliner

Re: Ignition Lock Cylinder: Any brand preference, good, bad, ugly?

Agreed.
Glad I dont have tilt.

JOE

1983 F150 XL Flareside, Shortbed.
4 X 4, auto, 351w, 4bbl added.

"It's hip to be square."

BARRYS83F100

Re: Ignition Lock Cylinder: Any brand preference, good, bad, ugly?

I would only use Motorcraft.