Bullnose Enthusiasts Forum

How did you spend your Memorial Day weekend

Classic

List

Threaded

7 messages Options

old55pete

How did you spend your Memorial Day weekend

Sad to say, I needed to work on the wife's 07 F150. Rats built a nest in the intake valley under the intake and chewed the wires off of one of the knock(detonation) sensor and the check engine came on. While I was in there I did the 100000 tune up 3000 miles early.

Steve
86 Bronco, XLT, 5.0 EFI, EEC IV, AOD, IFS, limited slip front and rear, 3.08 gears, Tilt steering, factory AC

salans7

Re: How did you spend your Memorial Day weekend

It's been raining all weekend so about all I've done is cleaned up around the house and mowed the lawn.

Ray Cecil

Re: How did you spend your Memorial Day weekend

I put the pool up. Finished the tree house. Cut 5 acres of grass. And started day dreaming about motorcycles again. Somebody stop me.

1988 F250 Supercab Longbed 7.3 IDI, C6, 1356, GEARVENDORS, 4.10 Sterling with autolocker

1986 F150 302, C6, 9" 2.75, Wood Flatbed

Shorty

Re: How did you spend your Memorial Day weekend

Battled a tree stump for two days. Great exercise but the tree won in the end. Time to call in the pros.

“Find what you love and let it kill you.”
― Charles Bukowski

1980 F100 Custom, Big Six, bench and 3 on the tree. My bare bones play truck.
2012 VW TDI Sportwagen daily driver.

Dennis

Ray Cecil

Re: How did you spend your Memorial Day weekend

Dennis, you are doing it wrong. Look up 55 gallon drum tree stump removal on youtube. Thank me later.

1988 F250 Supercab Longbed 7.3 IDI, C6, 1356, GEARVENDORS, 4.10 Sterling with autolocker

1986 F150 302, C6, 9" 2.75, Wood Flatbed

ArdWrknTrk

Re: How did you spend your Memorial Day weekend

Administrator

In reply to this post by Shorty

Tannerite.

Jim,
Lil'Red is a '87 F250 HD, 4.10's, 1356 4x4, Zf-5, 3G, PMGR, Saginaw PS, desmogged with a Holley 80508 and Performer intake.
Too much other stuff to mention.

Flint

Re: How did you spend your Memorial Day weekend

In reply to this post by old55pete

I finally got to replace the instrument panel in my F250 with a salvaged panel with tach and trip meter. Was much fun.

Also pulled the carpet out of the back of the Bronco and found the original build sheet.

All in all a good use of the time.

1984 Bronco 351W C6
1985 F250 rclb 300 4spd
1986 Bronco 302 C6 - not running