Bullnose Enthusiasts Forum › Marketplace › eBay, Craigslist, Facebook, & Kijiji Finds

Frame cross member [E0TZ-5025-A] - NOS

Classic

List

Threaded

5 messages Options

1986F150Six

Frame cross member [E0TZ-5025-A] - NOS

Administrator

https://www.ebay.com/itm/New-87-96-Ford-F-150-F-250-Frame-Crossmember-EOTZ5025A/133393630133?epid=1628758407&hash=item1f0ee143b5:g:RlsAAOSwVrZeoXdD

Gary Lewis

Re: Frame cross member [E0TZ-5025-A] - NOS

Administrator

That is not advertised correctly. It says that it fits 1987 - 96 trucks, but since it has an E0 prefix it obviously fits some trucks starting in 1980.

But crossmembers are not straightforward to look up. You do it by Parts List Number. Go to Documentation/Suspension & Steering/Crossmembers and then the Part Numbers tab. Find your truck's parts list number and then scroll down to see what parts are in the list.

I took a quick look and find that crossmember used in a whole bunch of parts lists, so it fits lots of Bullnose trucks. But the potential buyer needs to verify that it fits theirs.

Gary, AKA "Gary fellow": Profile

Dad's: '81 F150 Ranger XLT 4x4: Down for restomod: Full-roller "stroked 351M" w/Trick Flow heads & intake, EEC-V SEFI/E4OD/3.50 gears w/Kevlar clutches
Blue: 2015 F150 Platinum 4x4 SuperCrew wearing Blue Jeans & sporting a 3.5L EB & Max Tow
Big Blue: 1985 F250HD 4x4: 460/ZF5/3.55's, D60 w/Ox locker & 10.25 Sterling/Trutrac, Blue Top & Borgeson, & EEC-V MAF/SEFI

Rembrant

Re: Frame cross member [E0TZ-5025-A] - NOS

Gary Lewis wrote

I took a quick look and find that crossmember used in a whole bunch of parts lists, so it fits lots of Bullnose trucks.

Pretty sure it doesn't fit my 117" WB truck, so it must be for 133" WB and longer?

David, you and I are out buddy!

The only crossmember I have that is similar to this one has little bends/curls where the gas tank sits, and this one is flat...so I assume it goes AFT of the fuel tank crossmember on 133" and longer trucks?...

1994 F150 4x2 Flareside. 5.0 w/MAF, 4R70W, stock.
1984 F150 4X2 Flareside. Mild 302 w/ 5spd. Sold.
1980 F150 4X4 Flareside. 300i6 w/ 5spd. Sold in 2021.
1980 F100 4X2 Flareside. 351w/2bbl w/NP435. Sold in 1995

1986F150Six

Re: Frame cross member [E0TZ-5025-A] - NOS

Administrator

Rembrant wrote

David, you and I are out buddy!

FuzzFace2

Re: Frame cross member [E0TZ-5025-A] - NOS

In reply to this post by Rembrant

Rembrant wrote

Gary Lewis wrote

I took a quick look and find that crossmember used in a whole bunch of parts lists, so it fits lots of Bullnose trucks.

Pretty sure it doesn't fit my 117" WB truck, so it must be for 133" WB and longer?

David, you and I are out buddy!

The only crossmember I have that is similar to this one has little bends/curls where the gas tank sits, and this one is flat...so I assume it goes AFT of the fuel tank crossmember on 133" and longer trucks?...

Cory you are right

It is curved on the front side also.
The next cross member is the one aft axle and if you had a rear tank the tank straps hook to.

That wood 4x4 the frame is sitting on is on the rubber bumpers for the axle.
Dave ----

Dave G.
81 F100 flare side 300 six / AA OD / NP435 / 2.75 gear
http://cars.grantskingdom1.com/index.php/1980-Ford-F100?page=1
81 F100 style side 300 six/SROD parts truck -RIP
http://cars.grantskingdom1.com/index.php/1981-Ford-F100