Ford Hub replacement stickers

[reamer]

I got the screen made for the replacement F-150, Bronco, Ranger and Bronco II Manual locking hub decal/sticker.
Strange enough, Yes the F-150 and Ranger share the same hub face and decal...


I copied the original. If you ever tore apart the manual locking hub, the face plate sticker is destroyed. I should have them printed and ready for sale by Christmas....

Thoughts?

Now after your body work and paint is done, you will be able to "finish off" the job....

[1986F150Six]

As always, very nicely done!

[Gary Lewis]

Ron - I like them!  And, if I didn't have Mile Marker hubs for Dad's truck I'd want a set.  Cool!  Well done.  

[Steve83]

Same here - I've gone through some MMs, but I'm using factory autos right now; otherwise, I'd be interested in a few sets.  But my truck's original hub locks had red knobs, and I'm pretty sure they had "FORD" molded in, with an exposed center screw.  So I don't think it would have used stickers like these.

But these Warns (which are also OE for F-series) could certainly use "FORD" stickers!



I hope you sell a batch each to BroncoGraveyard, LMC Truck, Mac's Antiques, Tom's Bronco Parts, & any other parts suppliers for these trucks.



...and if you can figure out how to duplicate the original Nite & Lightning body stickers, you can retire.

[Gary Lewis]

Yes, Dad's original hubs had FORD molded in, and they were red.

And, selling to the aftermarket dealers is an excellent idea.  

[reamer]

Don't all 80's series 1/2 ton trucks and Bronco's have this type hub?
Not sure what you mean by "FORD molded in" unless they are the 3/4 hubs?

[Gary Lewis]

Ron - I don't have them anymore to tell for sure, but my remembrance is that the FORD lettering was embossed into the plastic on Dad's and there wasn't any label.  

[Gary Lewis]

David/1986F150Six supplied a link to a hub for sale on ebay.

That hub fits a bunch of the trucks, but there was another hub used as well.  The one below is an E1, or 1981 design.  But the other is a D9, or 1979 design.  In fact, it is part # D9TZ 1104-A, which was replaced by D9TZ 1K105-A.  So if someone can find a pic of those we might have an answer.

[Steve83]

reamer wrote

Don't all 80's series 1/2 ton trucks and Bronco's have this type hub?
Not sure what you mean by "FORD molded in" unless they are the 3/4 hubs?

No, my '83 Bronco's original locks didn't have the silver "FORD" stickers.  My memory is getting hazy after the past few decades, but the screw was visible in the center, and I think "FORD" was debossed (raised) from the red plastic.  Broncos use the same 1/2-ton axle as F150s: the D44IFS.  If you spent a few hours decoding the BOMs in this caption & cross-referencing them to known axles & locks, you might be able to figure out which axles got which locks:

Gary Lewis wrote

...D9TZ 1K105-A.  So if someone can find a pic of those...

That appears to be just the lock body (the guts); not the dust cap & dial assembly, which is where the sticker goes.



The 1104 number is the whole lock kit (both complete lock assemblies).

[82F150I6]

I realize this is an old thread but thought I'd check to see if these stickers are still available.

[Machspeed]

82F150I6 wrote

I realize this is an old thread but thought I'd check to see if these stickers are still available.

I'm gonna bump this, as I would be interested in these as well.

[Angelo Voltura]

If it matters. Dads 85 F250 had them originally.

[1986F150Six]

https://www.ebay.com/itm/Ford-F-150-Bronco-and-Ranger-Manual-Locking-Hub-replacement-stickers/174256182206?hash=item28927a53be:g:c-EAAOSwbklenOkq

https://www.ebay.com/itm/Ford-locking-hub-replacement-stickers-2-stickers-per-7-50-pair/174048561781?hash=item28861a4a75:g:9NoAAOSwknpdkfOg

[Machspeed]

Cool....thank you!!!

[1986F150Six]

Machspeed wrote

Cool....thank you!!!

[82F150I6]

I wouldn't have thought to look on eBay for these.  thx much.

[Vic Roma]

Are the black and red 'dust cap and dial assemblies' interchangeable?
I have the black dials with stickers but want the red dials.

[Vic Roma]

Correction:

I have black WARN but prefer red FORD.

[reamer]

Yep Still make them, One person in Australia ordered up 12 sets!

[Jermd21]

Reamer,

Reviving an old thread to see if you still have any of these stickers. Thanks.