EGR valve

[hubcityford]

After rebuilding carburetor I’m moving to replace my EGR valve however can’t seem to find a match. The one I have seems to have a thick base as seen in photo. Also have photo of ID tag. Any help on where to locate one would be appreciated.

I have an 81 F100 V8 255 if that helps.

[Gary Lewis]

CX-1061 is the Motorcraft number, and it cross references to Ford PN E4PZ 9D448-R, which will have an ID # of E0TE 9D448-L1A.  (Some people don't know that a number on a Ford part is the ID #, not the part #.)

[ArdWrknTrk]

Or that a basic part number 9D448, is the same for every EGR valve Ford ever sold or installed (across brands, lines and models)

[hubcityford]

Great thanks! I will start looking today. Everything I have seen so far hasn’t looked like the one on my truck…but this will definitely help.
 Have a good day
Jeremy

[85lebaront2]

Rock Auto carries a lot of Motorcraft PNs and there is a way to search for them. I wouldn't panic if it looks different unless you live where there are strict emission inspections.

Check these: https://www.rockauto.com/en/catalog/ford,1981,f-100,4.2l+255cid+v8,1120509,exhaust+&+emission,egr+valve,4968

[ArdWrknTrk]

Parts get superceded all the time.
I don't think appearance matters as long as it fits and is functionally equivalent.

[hubcityford]

The only one I found that matches is for V-8 5.0 on rockauto (which does not match my engine).

I found an old thread when you explained how to find the part list number and then part number. If I followed right it referenced 3 different part lists.

F100–M/T  CX-470
F100–M/T  CX-470
F100–A/T   CX-455

I wasn’t sure what the M/T and A/T signify. But it seems that I got some conflicting data with what’s on the engine verses what parts list is indicating.

I assumed that what’s on truck is original since it only has 87k miles.

Any thoughts?

Jeremy

[ArdWrknTrk]

Manual transmission or automatic transmission.

If CX455 is accurate for your application, we can see what that will cross to.

[Gary Lewis]

A/T is automatic transmission and M/T is manual. And it does seem like it shows a different valve. You don’t think yours has been changed?  If so, maybe your part was superseded?

[hubcityford]

It is automatic. I need to double check that I went through the calibration code/part number list cross reference. I’m doing all on my phone and it gets tricky reviewing.

Jeremy

[ArdWrknTrk]

It sure is a challenge on your (MY) phone..  

There seems to be a NOS CX-455 on eBay for $19, delivered.

https://www.ebay.com/itm/254590386979

[hubcityford]

Really don’t know if it has been changed or not but it was never a daily driver and only accumulated the 87k miles over 25 or so years. Then set up in carport for another 15. I am only assuming that most parts are original.

Jeremy

[hubcityford]

Thanks, that looks like a match! The base appears to be thicker like the one on my engine!!

Jeremy

[ArdWrknTrk]

Well, we can see that the engineering number is E0TE-9D448-E1A on the above EGR valve, but it does seem to match your Motorcraft number.

The sticker on your existing valve seems to show an E

As you say, it is a challenge to look up parts info on a cell phone.

I hope it works out for you!