Dash clock w/o harness [E3TF-15000-A] - used

classic Classic list List threaded Threaded
13 messages Options
Reply | Threaded
Open this post in threaded view
|

Dash clock w/o harness [E3TF-15000-A] - used

1986F150Six
Administrator
Reply | Threaded
Open this post in threaded view
|

Re: Dash clock w/o harness [E3TF-15000-A] - used

salans7
Sold.
Reply | Threaded
Open this post in threaded view
|

Re: Dash clock w/o harness [E3TF-15000-A] - used

1986F150Six
Administrator
salans7 wrote
Sold.
Hmmm?
Reply | Threaded
Open this post in threaded view
|

Re: Dash clock w/o harness [E3TF-15000-A] - used

Gary Lewis
Administrator
Seems suspicious, right?  
Gary, AKA "Gary fellow": Profile

Dad's: '81 F150 Ranger XLT 4x4: Down for restomod: Full-roller "stroked 351M" w/Trick Flow heads & intake, EEC-V SEFI/E4OD/3.50 gears w/Kevlar clutches
Blue: 2015 F150 Platinum 4x4 SuperCrew wearing Blue Jeans & sporting a 3.5L EB & Max Tow
Big Blue: 1985 F250HD 4x4: 460/ZF5/3.55's, D60 w/Ox locker & 10.25 Sterling/Trutrac, Blue Top & Borgeson, & EEC-V MAF/SEFI

Reply | Threaded
Open this post in threaded view
|

Re: Dash clock w/o harness [E3TF-15000-A] - used

salans7
In reply to this post by 1986F150Six
Thanks for spending my money.  
Reply | Threaded
Open this post in threaded view
|

Re: Dash clock w/o harness [E3TF-15000-A] - used

Gary Lewis
Administrator
David says he has a gift for finding things. He certainly does, but that gift seems to extend to spending other’s money. DAHIK  
Gary, AKA "Gary fellow": Profile

Dad's: '81 F150 Ranger XLT 4x4: Down for restomod: Full-roller "stroked 351M" w/Trick Flow heads & intake, EEC-V SEFI/E4OD/3.50 gears w/Kevlar clutches
Blue: 2015 F150 Platinum 4x4 SuperCrew wearing Blue Jeans & sporting a 3.5L EB & Max Tow
Big Blue: 1985 F250HD 4x4: 460/ZF5/3.55's, D60 w/Ox locker & 10.25 Sterling/Trutrac, Blue Top & Borgeson, & EEC-V MAF/SEFI

Reply | Threaded
Open this post in threaded view
|

Re: Dash clock w/o harness [E3TF-15000-A] - used

salans7
I need him to work his magic on a set of gussets for my transmission crossmember, as well as a throttle cable bracket for a 460.
Reply | Threaded
Open this post in threaded view
|

Re: Dash clock w/o harness [E3TF-15000-A] - used

1986F150Six
Administrator
salans7 wrote
I need him to work his magic on a set of gussets for my transmission crossmember, as well as a throttle cable bracket for a 460.
Gary, please check to see if this [E1TZ-98758-E] is correct for this application.

https://www.ebay.com/itm/254189860791

Reply | Threaded
Open this post in threaded view
|

Re: Dash clock w/o harness [E3TF-15000-A] - used

Gary Lewis
Administrator
Yes, I believe that is the correct cable.  However, two things.  First, Shaun asked for a throttle cable bracket.  

Second, this doesn't say it fits an '86 460.  However, I'm pretty sure nothing changed between '85 and '86 and I cannot find one that says it does fit an '86 w/a 460.  So I believe the MPC is wrong and I believe this does fit.  



Gary, AKA "Gary fellow": Profile

Dad's: '81 F150 Ranger XLT 4x4: Down for restomod: Full-roller "stroked 351M" w/Trick Flow heads & intake, EEC-V SEFI/E4OD/3.50 gears w/Kevlar clutches
Blue: 2015 F150 Platinum 4x4 SuperCrew wearing Blue Jeans & sporting a 3.5L EB & Max Tow
Big Blue: 1985 F250HD 4x4: 460/ZF5/3.55's, D60 w/Ox locker & 10.25 Sterling/Trutrac, Blue Top & Borgeson, & EEC-V MAF/SEFI

Reply | Threaded
Open this post in threaded view
|

Re: Dash clock w/o harness [E3TF-15000-A] - used

salans7
Throttle cables are the easy part, since they're reproduced. The brackets that bolt to the intake, are a different story. I got lucky when I had the 400, because I found a NOS bracket via U-Haul. But no such luck with the 460.
Reply | Threaded
Open this post in threaded view
|

Re: Dash clock w/o harness [E3TF-15000-A] - used

Gary Lewis
Administrator
What carb are you going to use?  I ask because I have the one on Big Blue that I made and it works well with an Edelbrock.  But since it was designed for that carb it might not work on another.

I hope to go EFI in the winter, so you could have this one if you'd like.

Here's a pic of it, but you can read about its development starting here.

Gary, AKA "Gary fellow": Profile

Dad's: '81 F150 Ranger XLT 4x4: Down for restomod: Full-roller "stroked 351M" w/Trick Flow heads & intake, EEC-V SEFI/E4OD/3.50 gears w/Kevlar clutches
Blue: 2015 F150 Platinum 4x4 SuperCrew wearing Blue Jeans & sporting a 3.5L EB & Max Tow
Big Blue: 1985 F250HD 4x4: 460/ZF5/3.55's, D60 w/Ox locker & 10.25 Sterling/Trutrac, Blue Top & Borgeson, & EEC-V MAF/SEFI

Reply | Threaded
Open this post in threaded view
|

Re: Dash clock w/o harness [E3TF-15000-A] - used

salans7
Thanks, but I'm planning on EFI as well. But something aftermarket like Sniper, or FI Tech. So no matter what, I may still have to make one to work.
Reply | Threaded
Open this post in threaded view
|

Re: Dash clock w/o harness [E3TF-15000-A] - used

ratdude747
In reply to this post by Gary Lewis
Gary Lewis wrote
David says he has a gift for finding things. He certainly does, but that gift seems to extend to spending other’s money. DAHIK  
 Guilty! Or in my case, spending my hotel and gas money too!
1984 F150: 300 L6, AOD, RWD. EEC IV / TFI, Feedback Carter YFA Carb. Stock everything but radio (for now).