Bullnose Enthusiasts Forum

Color coat application

Classic

List

Threaded

4 messages Options

Littlebeefy

Color coat application

Hi guys,
I know some of you have used Sem Color Coat with a lot of success. I'm going through the whole ritual with the prep and the sand-free pretreat, etc. I'm actually getting a custom color of the SEM mixed and I'm wondering whether I should do the aerosol or the pint can. Anyone brush it on versus spray it on and, if so, would you recommend that?
Thanks,
Chad

LittleBeefy aka Chad

“Dot Doitall”: 1984 Bronco XLT
460 (C8VE), Edelbrock Pro-Flo 4, ZF5, NP205, D44HP solid axle, 4.56
urban assault vehicle

"Bebe": 2022 Bronco Badlands 2dr
2.7l, Sasquatch, Iconic Silver, Black Marine-grade interior, hard-top

"Celeste": 1979 Porsche 928
4.5l K-jet, 5-sp, S4/GTS brakes, LSD, Pasha interior

Gary Lewis

Re: Color coat application

Administrator

All I’ve done is spray. Works well, but prep is a must.

Gary, AKA "Gary fellow": Profile

Dad's: '81 F150 Ranger XLT 4x4: Down for restomod: Full-roller "stroked 351M" w/Trick Flow heads & intake, EEC-V SEFI/E4OD/3.50 gears w/Kevlar clutches
Blue: 2015 F150 Platinum 4x4 SuperCrew wearing Blue Jeans & sporting a 3.5L EB & Max Tow
Big Blue: 1985 F250HD 4x4: 460/ZF5/3.55's, D60 w/Ox locker & 10.25 Sterling/Trutrac, Blue Top & Borgeson, & EEC-V MAF/SEFI

FuzzFace2

Re: Color coat application

Gary Lewis wrote

All I’ve done is spray. Works well, but prep is a must.

X2
If I was to get a pint can I would spray it on as I have the equipment.
Dave ----

Dave G.
81 F100 flare side 300 six / AA OD / NP435 / 2.75 gear
http://cars.grantskingdom1.com/index.php/1980-Ford-F100?page=1
81 F100 style side 300 six/SROD parts truck -RIP
http://cars.grantskingdom1.com/index.php/1981-Ford-F100

ckuske

Re: Color coat application

Administrator

I used a pint with a Preval spray head. I think it's much more economical to get the pint but with the Preval sprayer kit (they have them on Amazon) you have the best of both worlds.

Chris

'84 F-150 XL 2WD Flareside, 302 w/ AOD transmission, Motorcraft 2150 feedback carb w/ CA Emissions, EEC-IV w/TFI, factory A/C, Tilt Column, Borgeson/Bluetop Steering, Speed Control, 308,000+ miles - Info about me and my truck - My project thread