Search Forum
Clock kit [E3TZ 15A000-B] - NOS [not cheap!!!]
Locked
Clock kit [E3TZ 15A000-B] - NOS [not cheap!!!]
 
Administrator
|
Re: Clock kit [E3TZ 15A000-B] - NOS [not cheap!!!]
Administrator
|
It technically isn't for 1980 - 82 trucks as the plugs are different between the early and late clocks, as Jonathan recently pointed out. However, since this is the whole kit, including the wiring harness that plugs into the main harness, it may work on earlier trucks. I don't know.
Gary, AKA "Gary fellow": Profile
Dad's: '81 F150 Ranger XLT 4x4: Down for restomod: Full-roller "stroked 351M" w/Trick Flow heads & intake, EEC-V SEFI/E4OD/3.50 gears w/Kevlar clutches
|
Re: Clock kit [E3TZ 15A000-B] - NOS [not cheap!!!]
|
Administrator
|
Re: Clock kit [E3TZ 15A000-B] - NOS [not cheap!!!]
|
Administrator
|
Well spotted. But strange. The sheet is a 5124, which is correct for that kit. So, apparently that answers the question - the harness will plug into all years of Bullnose dash harnii.
As shown below, the earlier kit is an E1TZ-A and the instruction sheet would be a "5000". 
Gary, AKA "Gary fellow": Profile
Dad's: '81 F150 Ranger XLT 4x4: Down for restomod: Full-roller "stroked 351M" w/Trick Flow heads & intake, EEC-V SEFI/E4OD/3.50 gears w/Kevlar clutches
|
Re: Clock kit [E3TZ 15A000-B] - NOS [not cheap!!!]
|
Re: Clock kit [E3TZ 15A000-B] - NOS [not cheap!!!]
Administrator
|