Not sure what you are asking here, but I'll try and answer. Hope I'm not being obtuse.
Resetting Circuit breakers are typically used when a fuse blowing might be just as hazardous or more hazardous than a short circuit in certain situations.
The Circuit breaker in the Headlamp switch is one. When operating properly, it makes your headlamps flicker, but not go completely out when there is a short circuit. Headlamps going completely out on a dark highway not a good thing.
Power windows and door locks were thought the same way. What if you needed to get out in a hurry after a crash or other such problem etc... Thus resetting circuit breakers.
It's covered in the Federal Motor Vehicle Safety standards;
FMVSSI hope this helps...
Truck: 1981 F-150 Explorer / Engine: 300-6 California MCU Feedback System / Trans: T-18 - 4 speed / 2.75 Ford Rear Axle Open Diff.