Bullnose Enthusiasts Forum

C-322 - Duraspark II distributor connector

Classic

List

Threaded

25 messages Options

ArdWrknTrk

Re: C-322 - Duraspark II distributor connector

Administrator

Gary has exposed a number of failures in the factory documentation.
At least on bullnose trucks,

It wouldn't surprise me that they made mistakes on the previous generation as well

Jim,
Lil'Red is a '87 F250 HD, 4.10's, 1356 4x4, Zf-5, 3G, PMGR, Saginaw PS, desmogged with a Holley 80508 and Performer intake.
Too much other stuff to mention.

viven44

Re: C-322 - Duraspark II distributor connector

This post was updated on .

In reply to this post by ArdWrknTrk

I am not sure what kind of module they are calling for.. but anything you can buy today for a 78-79 is the same part number as a Bullnose module. So I didn't want to chance it.

I did double check my ignition key. White gets power in Run, Red gets power only during crank so White-Red and Red-White would be the working combination.

Vivek

- BB 2WD - 1984 F350 RWD 460/C6
- 1978 Bronco with a 460 from an 86 Bullnose/C6

ArdWrknTrk

Re: C-322 - Duraspark II distributor connector

Administrator

Jim,
Lil'Red is a '87 F250 HD, 4.10's, 1356 4x4, Zf-5, 3G, PMGR, Saginaw PS, desmogged with a Holley 80508 and Performer intake.
Too much other stuff to mention.

BigBrother-84

Re: C-322 - Duraspark II distributor connector

This post was updated on .

In reply to this post by viven44

viven44 wrote

I still don't understand why the 1979 EVTM calls for white-white and red-red

Personally, I just don’t understand the motivation of the genius guy who decided to reverse these wires colors.
Completely counter-intuitive.

Thanks to Gary, I learned that Big Brother was “normal”.

Jeff / 1984 F350 Crew Cab 4x4/5.8L w351 4V/ T18/ D50 4.10 front/ 8' bed.
Restored 2019-2022.
Nicknamed «Big Brother 1984», due to its soooo-looong shape & nod to George Orwell's 1984 famous novel.

ArdWrknTrk

Re: C-322 - Duraspark II distributor connector

Administrator

I imagine their engineering drawings were different between the Motorcraft module factory and whoever they subbed the harness to.

There was no CAD to revise all the different paper in different engineering divisions, so probably 'electronics' had a dyslexic drawing and after "stuff" was into production it was deemed best to 'just roll with it'

Jim,
Lil'Red is a '87 F250 HD, 4.10's, 1356 4x4, Zf-5, 3G, PMGR, Saginaw PS, desmogged with a Holley 80508 and Performer intake.
Too much other stuff to mention.