Bronco Audio solutions?

[Gsmblue]

Has anyone upgraded the stock stereo/speakers?

I installed a pioneer head unit and some infinity reference 6.5inch coax speakers up front and 6x9 in the rear. I stuck some of those boom backs to the speakers and it made a big difference, but I want more!


I just ordered an infinity reference 4 channel amp and an infinity slimline 8inch active sub designed to go under a seat.

The plan is to pull all the trim out and apply sound deadening to the doors and rear panels.

I am hoping I can mount the amp and sub under the rear bench seat, I want everything hidden!

I will take pics and post on my main project thread.

Any thoughts or suggestions?

[ArdWrknTrk]

Uh, no.

But I'm following closely because I see an audio upgrade in the not too distant future.  

[Gary Lewis]

If you are pulling things out, why not the seat(s) and carpet and apply the sound deadening to the floor as well?  A lot of the road noise is said to come in that way, and certainly most of the drivetrain noise does.

Also, I just posted about this on another thread, but you should consider a center channel speaker.  If your amp doesn't have a center channel out you can achieve the same thing by feeding the minus signal from one side and the plus signal from the other to a single voice coil speaker.  Or, you can buy a dual voice coil speaker and give it both channels.  Put in the center of the dash you'll get what is common to both channels and it blends things together nicely.

[Gsmblue]

I only have a 1.5 day window to get this done. The temps will be above 55 on Friday and Saturday and I am trying to maximize what I can do in that time.

Realistically if my friend helps I think I can apply sound deadening to the doors and the rear panels and install all the gear.

Then in the summer I want to replace the carpet and recover the seats so I can do the firewall all the way to the tailgate then.

I will get pics :)