My brake lights don't work. What does work....
All Bulbs and they are Correct
L/R turn signals
reverse lights
running lights
I went from the Pedal switch 1st it works too.
Checked the Harness to chassis and harness to Colum All good.
Fed 12V to the brake lights and they light up.
Checked Fuses All good.
This is what's happening.
No brakes until I move the left turn signal slightly up while depressing the brake pedal the Left Brake light comes on.
I looked up the wiring diagram and it APPEARS that the brakes go through the Turn signal switch
Can anyone confirm this?
LOUISIANA 1985 Bronco 351W 5.8L XLT With C6 Trans.
Swap= Softopper, Holley Model 4160, Edelbrock Intake, Summit HEI Dizzy, Perf Wires, Hooker Long collectors, 134a conversion.
Replaced= Water pump, Heads, Vacuum lines, Ignition solenoid.
Locked
