Getting ready to bolt everything together before I drop it in. Need to know the right bolt threads and lengths for the ZF5 bellhousing to 460, starter, and NP205 to ZF5 tailhousing. The tailhousing is 3/4" thick and the bellhousing in 3/4" thick at the top and 2" thick below. Would save me a lot of trouble if someone could help me out with the lengths on this particular mash-up.
Thanks!
LittleBeefy aka Chad
“Dot Doitall”: 1984 Bronco XLT
460 (C8VE), Edelbrock Pro-Flo 4, ZF5, NP205, D44HP solid axle, 4.56
urban assault vehicle
"Bebe": 2022 Bronco Badlands 2dr
2.7l, Sasquatch, Iconic Silver, Black Marine-grade interior, hard-top
"Celeste": 1979 Porsche 928
4.5l K-jet, 5-sp, S4/GTS brakes, LSD, Pasha interior
Locked
