One last question before i head out to get my pag 46 oil. I have to put the old blocks from the old compressor onto the new one. Other then makeing sure they are clean and the o rings are lubricated, is there anything else i need to know?
Nick and George
1986 1/2 F150 XLT Lariat 4X2 300 Six - C6 - 3:08 in a 8.8 - Fully Loaded - 8 Foot Box
Owned since new
I don't think so.
My junk yard compressor already had them on so I left them.
I also made sure they were on the compressor as I did not have any to put on a new compressor and the ones I found on Ebay months back were $100 each!
Dave ----
Locked
