83 cluster and dash trim am radio

[gotfords]

i have more pics if interested...let me know if you can use any of these
i am in AZ near the old FORD  proving grounds...tons of old ford truck parts here

[1986F150Six]

Please tell us more about the old Ford proving grounds!

[gotfords]

try google.....it is in Yucca AZ....the facility is still there at its core...Mercedes bought it when they were with chrylsler... then when that split happened Fiat/c Chrysler FCA took it over...it has many mods done to it since Ford left and now Harley Davidson leases some of the grounds to test motorcycles going on 8 years or so, lots of older Ford employees here that came from Michigan and tons of Ford trucks and cars they have bought while working out there have made it to the salvage yards for picking

[pugster]

Would they have a heater control cable for an 85 w/AC?

[gotfords]

i can check

[old55pete]

Tommy, If you havent gone out to the old proving grounds yet, can you see if one of the 80- 86 trucks has a tilt coloum in it? If so, grab it and let me know how much. I dont mind paying for your time also

[gotfords]

i will check on monday....

[AzF250]

Hello
Id be interested in the center piece with radio if you still have it.


On a side note i was unaware there was a ford proving ground in az

[gotfords]

ok..let me check...my wife and i have both been down with the covid....i gotta check on the radio bezel ..i just saw the radio yesterday


where you located?

yes proving grounds was located in yucca Az for years....they, with volvo, built a new one closer to phoenix some years back....

[AzF250]

Im near show low az. More than willing to meet or whatever we need to do.
Not in any kind of a hurry
Hope you get well soon

[gotfords]

here are better pics


let me know if these are what you want

[AzF250]

Looks good to me ill be back with the truck this weekend lemme check

[AzF250]

The radio is all i need i was actually able to repair the one i have. 9282459094

[farmboy60]

i could use the black radio bezel for my project if i screw up the one i just got

[gotfords]

ok...let me know when you want it..

[farmboy60]

any time,i tried to email you it didn't go through  I'm trying to cut the clock holes out on the one i got if i fubar it ill use yours and won't touch it

[farmboy60]

unless you find one at the ford grounds that has the clock holes and is black

[Jordanlogo]

Any more center trims where the radio would go? The XL trim would be best!

[gotfords]

let me look...will let you know

[Bulletproof250]

So awesome to find this Marketplace here,  If there is still a radio or Non- Bezel,  please post pics or let me know availability. I'd be interested in the 2 knob radio AM, AM/FM, or AM/FM Cassette really anything