83-86 6.9 t-19 clutch fork

[Haystack]

Hello all!

I have been fighting clutch issues with my 85 cab and chassis f-350. It is the above 8500gvwr with the t-19 and a 460.

My clutch fork broke, and apparently it is a over 8500gvwr 85-86 460 or 83-86 6.9 with the t-19 only part.

I have been to every junkyard 3 counties in every direction, and haven't found what I need. The regular "under 8500gvwr" f-250 460 uses the t-18 and a different bellhousing, and clutch fork for some reason, and that is all I have been able to source so far.

The replacements are not available, (rock auto part number za-126) and appears to have not been available for quite some time.

If anyone has an extra one laying around, I would really appreciate it, as well as a picture to verify it is the correct clutch fork.

Thank you!

Kevin, located near SLC Utah.

[ArdWrknTrk]

No
ALL 460's & IDI's use a T-19

I bought a new one for my truck.
But it went when I swapped to Zf-5

Kevin, I am a very resourceful individual, and I can help.
But I have my rear end torn apart, and have just got out of the hospital, so it may take a bit

Again ANY manual IDI or 460 has a T-19💡
I hope this helps, and I will help you.
But I have a whole lot of  to get done RN.
Good luck.

[1986F150Six]

Will this work? [E7TZ-7515-A]

https://www.ebay.com/itm/191809151458?fits=Make%3AFord&epid=1117850709&itmmeta=01HW0C54XS30AYP3W95GVS10BJ&hash=item2ca8b761e2:g:EyMAAOSwlJBb4xZH&itmprp=enc%3AAQAJAAAA0CnhWYy5oyXK1Y70DEjeRrfNTcD0ivi3RaRoBroNGV7YYan0w8%2FK2yAQPaZUvaDg6CWB1fXyfvzN%2FUGtWGrMtJKFN5sn8wR4w1915FliiFmnvZ8MufACbhHWGLQN8LGZCym2FZs30wvvkrNVfVZKdCUL0Eao54nFDqGQUtwn0zUep0WaG82fDW7NhR4p6To5dDyllpv9tSyQ5kHRGE2aKqialKNq95s5HornX%2B2nuBrnCAysCmEP9LxcnOLaJTP4Ma2hCldLf%2BKiKXtXjCY2y58%3D%7Ctkp%3ABk9SR_7OlIzgYw

Seller states:
Flywheel Clutch Release Fork is a direct fit for the following:
1987-1997 Ford F-250
1984-1997 Ford F-350
1987-1997 Ford F Super Duty

Designed For Models With Either 7.3L Diesel OR 7.5L Gas Engines


Genuine Ford Part Number: E7TZ-7515-A