300 engine clutch release pivot pin [E0TZ-7A535-A] - NOS

[1986F150Six]

https://www.ebay.com/itm/185752740672?epid=1523081658&hash=item2b3fb9e340:g:pkwAAOSw7M1j09ps&amdata=enc%3AAQAHAAAAoKYtUPAISOl%2F3PKSleI1rIMIKjr2vxVDRj%2BkRFs1PdpW5vDNVzSfDorXO73cptUWTJpTt9%2BvDioyOkE4yBT77c9KkYMH%2BQND%2BVRwy2HZDnuLlBNJ%2BLvkh0SmYLP%2Fu%2BqHj0hE4aV5UWZ79SjzoLB9uc6XM9jpe%2BA3hFzQaR36fFAisTNr84GfXconnqgheeIXhLDEposMzQUXfbek3oqhrnI%3D%7Ctkp%3ABk9SR6yf0Oy_YQ

[1986F150Six]

And another one of the rare buggers:

https://www.ebay.com/itm/175587229892?hash=item28e1d080c4:g:8fMAAOSwpBlj0bgQ&amdata=enc%3AAQAHAAAAkKnvqKrytTvUNba0ajTaMqS0Y6cybZvZklaPdq3ymFziw%2BaRLZL99AIwtt4QSMzJM9kdx9JZs4YXv3bkeSv4%2Bk%2B60FzStZHc4UPEqXP%2BGdy16qJbtJ5W%2F2GPUKdolVEp1g5MVYpfsp6ltK%2Bk38PIVTQ6FTRJHYElARfcZ50n0QIwTGWhr%2B9%2Fow9nTOlFTw4EUg%3D%3D%7Ctkp%3ABk9SR7bKgO2_YQ

[Gary Lewis]

Yikes!  I started with the $150 one and then found the $190 one.  

Clearly those folks know what they have.  And there's a huge opportunity for someone to CNC these.

[Rembrant]

Who was looking for one recently? Was it Jonathan?

I had one I removed from a bad 300 one time and it was in like-new condition. I sent it to Ray Cecil but it likely went with his old Bullnose. Had I known at the time they'd be so hard to find I would have had a few made while I had it to measure/duplicate.

They'd be expensive to make here...but they could stamp 'em out for a few bucks each in China.

[FuzzFace2]

I would love a second one just to have in case and would even be willing to use it for measurement to get others made but I am cheap and will not pay $150 for one ...... just yet!
Dave ----