No problem there Blackdog.
1981 F 150 Custom 300 ci with a fully rebuilt 1968 240 head Carter YFA T-18 3.25 9" rear 2WD
dual gas tanks 1990 Lincoln Town Car 5.0 AOD Home town Mc Kenzie, TN |
In reply to this post by blackdog
What part of the country do you live in? These are pretty big to ship.
Donald
1985 Ford F150 XLT Lariat, 5.8W HO, 4BBL, 2wd, Long Bed, Red and Tan
|
NYS On Fri, Feb 8, 2019, 10:32 PM donaldb [via Bullnose Enthusiasts] <[hidden email] wrote: What part of the country do you live in? These are pretty big to ship.
86 5.0 AOD 2WD flareside
|
In reply to this post by blackdog
looking for the door maps at bottom of door panels they should be plastic not carpet for my 84 color no concern to me would you still have them?
|
Dont have em, sorry On Mon, May 13, 2019, 12:24 AM biga17133 [via Bullnose Enthusiasts] <[hidden email] wrote: looking for the door maps at bottom of door panels they should be plastic not carpet for my 84 color no concern to me would you still have them?
86 5.0 AOD 2WD flareside
|
Administrator
|
In reply to this post by blackdog
I'm probably too late, but do you have the horn pad with Rosewood? Is it cruise perhaps (crossing fingers big time)
Chris
'84 F-150 XL 2WD Flareside, 302 w/ AOD transmission, Motorcraft 2150 feedback carb w/ CA Emissions, EEC-IV w/TFI, factory A/C, Tilt Column, Borgeson/Bluetop Steering, Speed Control, 308,000+ miles - Info about me and my truck - My project thread |
Not cruise and it is broken, sorry. Rest of rosewood still there though On Mon, May 20, 2019, 2:31 PM ckuske [via Bullnose Enthusiasts] <[hidden email] wrote: I'm probably too late, but do you have the horn pad with Rosewood? Is it cruise perhaps (crossing fingers big time)
86 5.0 AOD 2WD flareside
|
Administrator
|
Ok, thanks though! I've managed to scrounge everything else together, that's the last piece for me. (and the hardest apparently)
Chris
'84 F-150 XL 2WD Flareside, 302 w/ AOD transmission, Motorcraft 2150 feedback carb w/ CA Emissions, EEC-IV w/TFI, factory A/C, Tilt Column, Borgeson/Bluetop Steering, Speed Control, 308,000+ miles - Info about me and my truck - My project thread |
Alrighty, good luck brother! Check the Ebay finds section, theres one member who is always watching for bullnose stuff on there On Mon, May 20, 2019, 9:08 PM ckuske [via Bullnose Enthusiasts] <[hidden email] wrote: Ok, thanks though! I've managed to scrounge everything else together, that's the last piece for me. (and the hardest apparently)
86 5.0 AOD 2WD flareside
|
Administrator
|
<quote author="blackdog">
Alrighty, good luck brother! Check the Ebay finds section, theres one member who is always watching for bullnose stuff on there The woodgrain pattern looks different, to me. Perhaps Gary can shed some light on the original application. https://www.ebay.com/itm/NOS-FORD-1982-84-F150-Truck-Bronco-Black-Woodgrain-Horn-Pad-with-Cruise-CT40/223494503952?epid=1828651328&hash=item34094f7e10:g:q6MAAOSwQbpcwgmo:sc:USPSPriority!95125!US!-1 |
Administrator
|
There are only two mentions of "13K802" in the catalog and they are both black in color. So this ain't it. But, that grain was used on vans, not pickups. It is not Rosewood. However, it will work.
Gary, AKA "Gary fellow": Profile
Dad's: '81 F150 Ranger XLT 4x4: Down for restomod: Full-roller "stroked 351M" w/Trick Flow heads & intake, EEC-V SEFI/E4OD/3.50 gears w/Kevlar clutches
|
Administrator
|
Thanks for the suggestion guys, it is indeed different but better than the black plastic showing now. The PO just peeled all the Rosewood off the horn pad on a whim because it was peeling I guess...
I may try some 3M vinyl samples and see how it looks. That way my original plan on the cluster bezel, but I lucked out and found a nice one on eBay for a reasonable price. This looks really good color/pattern wise: https://www.metrorestyling.com/3M-DI-NOC-Rosewood-Vinyl-p/dinocrosewood.htm Maybe some time and an X-acto knife would have good results
Chris
'84 F-150 XL 2WD Flareside, 302 w/ AOD transmission, Motorcraft 2150 feedback carb w/ CA Emissions, EEC-IV w/TFI, factory A/C, Tilt Column, Borgeson/Bluetop Steering, Speed Control, 308,000+ miles - Info about me and my truck - My project thread |
In reply to this post by blackdog
Hi Blackdog; I'm looking for the lower body molding with the black insert for the doors and fender and the chrome strips that goes on the front fenders. Dan
Dan Crowley
|
In reply to this post by blackdog
What transmission?
Pete's Ponies
Mustang RUSToration & Performance 1982 F100 Flareside 1983 Bronco |
AOD but I sold it locally On Mon, Aug 19, 2019, 9:38 PM PetesPonies [via Bullnose Enthusiasts] <[hidden email] wrote: What transmission?
86 5.0 AOD 2WD flareside
|
A-Pillar trim?
1985 F-350 XL | 460 | C6 | "Rufus Maximus"
1986 F-150|Standard Cab|4x2|300Six|C6Transmission w/3.08 rear|Name:TBD 2021 Ranger XLT Super Crew | Cactus Grey | black out package | max tow |
Edit this page |